MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA4400 Starter Kit - Direct connection with FC ?

 
Morten_8
Occasional Visitor

EVA4400 Starter Kit - Direct connection with FC ?

Hi there

Setting up a new EVA4400 SAN, this time without switches, HBA's directly connected to the HSV3000. For some reason I cannot get a link and I have figured out that the possible reason is that I have to re-configure the HBA's in the HSV to accept Direct Attached FC's, is this correct ?

How can I configure this when I cannot connect to the HSV ???

Thanks for any help.


Brg Morten
1 REPLY 1
Uwe Zessin
Honored Contributor

Re: EVA4400 Starter Kit - Direct connection with FC ?

That must be done through the management module (also known as WOCP - Web-Based Operator Control Panel).

The process is described in the EVA-4400 user manual. I don't know which edition you have, but there should be a section called "Changing the default operating mode" in Chapter 2 - EVA4400 operation.

.