MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA5000 Loop Pair Failure

 
CA1012336
Occasional Contributor

EVA5000 Loop Pair Failure

I received a notification from Command Veiw stating that a loop pair failure occurred. If I look at the EVA5000 itself there are no flasking red lights, no errors on the display, nothing to indicate a failure. Yet if I look in Command View and I look at the "Device Ports" tab under either controller it shows the ooperationals state as "Failed". If I try to enable it, it does nothing. Any ideas how to correct this?
Of course I don't lokk busy, I did it right the first time