MSA Storage
1748275 Members
4021 Online
108761 Solutions
New Discussion юеВ

Emulex or Qlogic HBA compatible with MSA1000

 
Claudio Carrara
New Member

Emulex or Qlogic HBA compatible with MSA1000

Hi
I'have a Msa1000 san Equipment. I must connect to IT in DA mode an old DELL PE6450 server which runs w2000/03 server. This server has only PCI 64bit 33-66Mhz for HBA card.
I find a lot of cheap HBA by Qlocic and Emulex.
My question is.
Are Emulex LP8000 or QLogic QA2200F (FC 1Gbps with LC connector) compatible with MSA1000 ???
Are there any other PCI HBA compatibles with MSA1000???
Tank-you for your answer.
C.Carrara

 

 

P.S. This thread has been moved from General to Storage Area Networks (SAN) (Small and Medium Business). - Hp Forum Moderator

4 REPLIES 4
raadek
Honored Contributor

Re: Emulex or Qlogic HBA compatible with MSA1000

LP8000 & QA2200F are not supported.

See this document for full (not very long though) list of supported HBAs:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00293465/c00293465.pdf

Regards,
Radek
Don't panic! [THGTTG]
raadek
Honored Contributor

Re: Emulex or Qlogic HBA compatible with MSA1000

Ops, sorry! I posted a link to the MSA1500 doc instead of MSA1000!

Here is the right one:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00222327/c00222327.pdf
Don't panic! [THGTTG]
Uwe Zessin
Honored Contributor

Re: Emulex or Qlogic HBA compatible with MSA1000

Some versions of the Emulex LP8000 were sold as the DS-KGPSA-CB which is supported on Windows 2000 + 2003. A 1 GBit Qlogic adapter was, as far as I can tell, never supported on the MSA1000, but you could try.

The attached file from "raadek" is a MSA1500cs support list, which does not apply.
.
Uwe Zessin
Honored Contributor

Re: Emulex or Qlogic HBA compatible with MSA1000

That is an MSA1000 list, but it is from 2004 - the tables I have looked at have a revision date of 10 February 2006.
.