MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Failed to connect to MSA 2012i management controller

 
Peter Van Keymeulen
Occasional Visitor

Failed to connect to MSA 2012i management controller

We’ve installed a Vdisk and start scrubbing. After one week, it’s still not finished.
Our problem now is that we are no longer able to connect to our management controllers, neither through http nor through the CLI?? Pinging the management controller is still OK.
How do we recover from this issue?
Thanks in advance,
Regards,
Peter


2 REPLIES 2
Uwe Zessin
Honored Contributor

Re: Failed to connect to MSA 2012i management controller

From what I have seen, the scrubbing starts again when one vdisk has finished.

Have you tried to connect through the serial port if you said CLI?
.
Peter Van Keymeulen
Occasional Visitor

Re: Failed to connect to MSA 2012i management controller

Dear,
We used different notebooks to connect to the serial CLI and it worked only with the third notebook we took. We were able to restart the controllers and everything is OK now.
Regards,
Peter