HPE Community
MSA Storage
1752725 Members
5698 Online
108789 Solutions
New Discussion

Re: Firmware for Storageworks 4/16 Switch

 
Jon Dyke
New Member

‎02-09-2009 05:23 AM

‎02-09-2009 05:23 AM

Firmware for Storageworks 4/16 Switch

Does anyone know where I can get firmware version 5.1.1b for the Storageworks 4/16 Switch?

Problem I have is that the earliest version listed for download on the HP site is 5.3.1 (6.2 is the latest) but this says it needs a minimum of 5.1.1b to install. Bit of an issue as I am on 5.0.1b so have to update to 5.1.1b before I can go any further....yet it is nowhere to be found :-(
0 Kudos
Reply
1 REPLY 1
Sheldon Smith
HPE Pro

‎02-10-2009 05:20 AM

‎02-10-2009 05:20 AM

Re: Firmware for Storageworks 4/16 Switch

HP has internal archives of old Brocade firmware. Contact your HP Support and tell them what you are looking for. They should be able to dredge it up.

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.