HPE Community
MSA Storage
1753259 Members
5402 Online
108792 Solutions
New Discussion

Re: Firmware update for controller on HP 2000 G3 MSA

 
WillD
Occasional Visitor

‎09-26-2016 07:28 AM

‎09-26-2016 07:28 AM

Firmware update for controller on HP 2000 G3 MSA

When trying to download the firmware update, it prompts for OS.  AFAIK, there is no OS....only firmware on the SAN.  What do I choose here?

 

Also...is there a way to backup the current firmware before updating?

 

Thanks,

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎09-26-2016 11:45 AM

‎09-26-2016 11:45 AM

Re: Firmware update for controller on HP 2000 G3 MSA

The firmware itself is bundled with a loader for windows or linux.

windows:

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5111373&swItemId=MTX_474cd8362e0e4ffea414bd8d50&swEnvOid=4103

you can run this file and select extract to extract the *.bin file, or just follow the utility instructions.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.