MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware updates on MSA2000 G3 contoller without network management port. How to?

 
cnpith
Occasional Contributor

Firmware updates on MSA2000 G3 contoller without network management port. How to?

We apperently have 1 dead mgmt port on Controller B. We were able to upload and configure controller A to the newest firmware TS250P003.

How can we go about deploying the updated firmware to controller B without the us of the mgmt port? Controller B firmware is TS201R014

Thesse units have an onbaord USB port but I could not find any references on how to deploy onto a thrumbdrive and update the firmware. Besdides this 1 dead mgmt port the controller has been working for years.

2 REPLIES 2
giladzzz
Honored Contributor

Re: Firmware updates on MSA2000 G3 contoller without network management port. How to?

Hi

you can not do upgrade from usb port this is a serial managment port

you could check if partner firmware upgrade is enabled

and see if you re-insert the controller with a problem if the controllers will update each other

in CLI

set advanced-settings partner-firmware-upgrade enabled

or try

set job-parameters partner-firmware-upgrade enabled

these command are from HP P2000 G3 MSA System
CLI Reference Guide 

http://h10032.www1.hp.com/ctg/Manual/c02520779

Regards

 

Torsten.
Acclaimed Contributor

Re: Firmware updates on MSA2000 G3 contoller without network management port. How to?

Latest version is

 

TS252R007

 

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5111373&swItemId=MTX_1af540c14b3c40beb4089286a5&swEnvOid=4064


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!