MSA Storage
1752586 Members
3970 Online
108788 Solutions
New Discussion юеВ

HP 2040 expand pool with new disk group

 
itkenneth
Occasional Advisor

Re: HP 2040 expand pool with new disk group

thank you 

and 

how can i close the vrsc that it has a high loading

Re: HP 2040 expand pool with new disk group

Please find the steps to disable VRSC or scrub for vdisk,

To configure background scrub for vdisks
1. In the Configuration View panel, right-click the system and select Configuration > Advanced Settings > System Utilities.
2. Set the options:
яВв Either select (enable) or clear (disable) the Vdisk Scrub option. This option is enabled by default.
яВв Set the Vdisk Scrub Interval (hours) option, which is the interval between background vdisk scrub finishing and starting again, from 0тАУ360 hours. The default is 24 hours.
3. Click Apply.

I wouldn't suggest to disable Vdisk Scrub option. Scrub actually what is does -> system continuously analyzes disks in vdisks to find and fix disk errors.

You have another scrub option for disks which are not part of vdisks as well.

To configure background scrub for disks not in vdisks
1. In the Configuration View panel, right-click the system and select Configuration > Advanced Settings > System Utilities.
2. Either select (enable) or clear (disable) the Disk Scrub option. This option is disabled by default.
3. Click Apply.

Any scrub option is important with respect to find drive errors and fix them.

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

****************************************************************************


I work for HPE
Accept or Kudo
itkenneth
Occasional Advisor

Re: HP 2040 expand pool with new disk group

Sorry, i can't find the Configuration View panel. 

so, i can't right-click the system and select Configuration > Advanced Settings > System Utilities.

different version??

Re: HP 2040 expand pool with new disk group

You better check for CLI option so look for below command from CLI guide where options are background-scrub and background-disk-scrub,

set advanced-settings

https://support.hpe.com/hpesc/public/docDisplay?docId=c04957376

 

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************


I work for HPE
Accept or Kudo