- Community Home
- >
- Storage
- >
- Entry Storage Systems
- >
- MSA Storage
- >
- Re: HP MSA 2040 SAN crashing
Categories
Company
Local Language
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Community
Resources
Forums
Blogs
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-06-2017 12:22 PM - edited 10-06-2017 12:28 PM
10-06-2017 12:22 PM - edited 10-06-2017 12:28 PM
HP MSA 2040 SAN crashing
I have an MSA 2040 SAN with dual controller and a second enclosure. They have worked fine since I installed them in late 2014. Tuesday, the SAN crashed, and the primary enclosure showed a fault light. Trying to access the web interface said "Initialization failed". I rebooted the system, and it came up normal and ran fine. That is until today. Same exact thing happened. I have made no hardware or software changes in the last few weeks.
Below are my error logs from Enclosure A. I can't really decipher what is going on. It appears one of my servers is constantly trying to log into the SAN and failing. I can't think of why it would be, and not sure if it is related. I am only attaching up to the end of day on Oct 3, because today's logs are basically EXACTLY the same.
FIRMWARE:
Bundle Version: GL105P001-03
Storage Controller: GLS105R04-01
Storage Controller Loader: 27.015
Management Controller: GLM105R009-01
Management Controller Loader: 6.04.16617
Expander: 3117
CPLD: 42
Sep 28 11:22:36 (none) auth.info sshd[10081]: Failed password for root from 192.168.30.91 port 12452 ssh2
Sep 28 11:22:39 (none) auth.err sshd[10081]: error: PAM: Permission denied for root from 192.168.30.91
Sep 28 11:22:39 (none) auth.info sshd[10081]: Connection closed by 192.168.30.91 [preauth]
Sep 28 15:16:49 (none) auth.info sshd[14885]: Did not receive identification string from 192.168.30.91
Sep 28 15:27:50 (none) auth.info sshd[15114]: Did not receive identification string from 192.168.30.91
Sep 28 15:27:53 (none) auth.info sshd[15117]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus
Sep 28 15:27:56 (none) auth.info sshd[15117]: Failed password for root from 192.168.30.91 port 24622 ssh2
Sep 28 15:27:58 (none) auth.err sshd[15117]: error: PAM: Permission denied for root from 192.168.30.91
Sep 28 15:27:58 (none) auth.info sshd[15117]: Connection closed by 192.168.30.91 [preauth]
Sep 28 19:16:09 (none) auth.info sshd[19801]: Did not receive identification string from 192.168.30.91
Sep 28 23:16:17 (none) auth.info sshd[24725]: Did not receive identification string from 192.168.30.91
Sep 29 03:16:49 (none) auth.info sshd[29637]: Did not receive identification string from 192.168.30.91
Sep 29 07:16:54 (none) auth.info sshd[2104]: Did not receive identification string from 192.168.30.91
Sep 29 07:22:22 (none) auth.info sshd[2260]: Did not receive identification string from 192.168.30.91
Sep 29 07:22:26 (none) auth.info sshd[2263]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus
Sep 29 07:22:30 (none) auth.info sshd[2263]: Failed password for root from 192.168.30.91 port 14036 ssh2
Sep 29 07:22:34 (none) auth.err sshd[2263]: error: PAM: Permission denied for root from 192.168.30.91
Sep 29 07:22:34 (none) auth.info sshd[2263]: Connection closed by 192.168.30.91 [preauth]
Sep 29 11:16:50 (none) auth.info sshd[7142]: Did not receive identification string from 192.168.30.91
Sep 29 15:16:54 (none) auth.info sshd[12035]: Did not receive identification string from 192.168.30.91
Sep 29 19:16:07 (none) auth.info sshd[16928]: Did not receive identification string from 192.168.30.91
Sep 29 23:16:23 (none) auth.info sshd[21845]: Did not receive identification string from 192.168.30.91
Sep 30 03:16:49 (none) auth.info sshd[26769]: Did not receive identification string from 192.168.30.91
Sep 30 03:22:06 (none) auth.info sshd[26883]: Did not receive identification string from 192.168.30.91
Sep 30 03:22:10 (none) auth.info sshd[26886]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus
Sep 30 03:22:13 (none) auth.info sshd[26886]: Failed password for root from 192.168.30.91 port 15958 ssh2
Sep 30 03:22:17 (none) auth.err sshd[26886]: error: PAM: Permission denied for root from 192.168.30.91
Sep 30 03:22:17 (none) auth.info sshd[26886]: Connection closed by 192.168.30.91 [preauth]
Sep 30 07:15:32 (none) auth.info sshd[31672]: Did not receive identification string from 192.168.30.91
Sep 30 11:16:47 (none) auth.info sshd[4305]: Did not receive identification string from 192.168.30.91
Sep 30 11:22:00 (none) auth.info sshd[4410]: Did not receive identification string from 192.168.30.91
Sep 30 11:22:04 (none) auth.info sshd[4418]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus
Sep 30 11:22:07 (none) auth.info sshd[4418]: Failed password for root from 192.168.30.91 port 30993 ssh2
Sep 30 11:22:10 (none) auth.err sshd[4418]: error: PAM: Permission denied for root from 192.168.30.91
Sep 30 11:22:10 (none) auth.info sshd[4418]: Connection closed by 192.168.30.91 [preauth]
Sep 30 15:16:36 (none) auth.info sshd[9230]: Did not receive identification string from 192.168.30.91
Sep 30 19:16:10 (none) auth.info sshd[14139]: Did not receive identification string from 192.168.30.91
Sep 30 23:16:27 (none) auth.info sshd[19071]: Did not receive identification string from 192.168.30.91
Oct 1 03:16:44 (none) auth.info sshd[23985]: Did not receive identification string from 192.168.30.91
Oct 1 07:15:43 (none) auth.info sshd[28878]: Did not receive identification string from 192.168.30.91
Oct 1 11:16:56 (none) auth.info sshd[1336]: Did not receive identification string from 192.168.30.91
Oct 1 15:16:45 (none) auth.info sshd[6384]: Did not receive identification string from 192.168.30.91
Oct 1 19:16:07 (none) auth.info sshd[11289]: Did not receive identification string from 192.168.30.91
Oct 1 23:15:18 (none) auth.info sshd[16192]: Did not receive identification string from 192.168.30.91
Oct 1 23:19:21 (none) auth.info sshd[16279]: Did not receive identification string from 192.168.30.91
Oct 1 23:19:24 (none) auth.info sshd[16282]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus
Oct 1 23:19:28 (none) auth.info sshd[16282]: Failed password for root from 192.168.30.91 port 60828 ssh2
Oct 1 23:19:31 (none) auth.err sshd[16282]: error: PAM: Permission denied for root from 192.168.30.91
Oct 1 23:19:31 (none) auth.info sshd[16282]: Connection closed by 192.168.30.91 [preauth]
Oct 2 03:16:47 (none) auth.info sshd[21152]: Did not receive identification string from 192.168.30.91
Oct 2 07:15:43 (none) auth.info sshd[26046]: Did not receive identification string from 192.168.30.91
Oct 2 11:16:52 (none) auth.info sshd[30993]: Did not receive identification string from 192.168.30.91
Oct 2 15:16:14 (none) auth.info sshd[3574]: Did not receive identification string from 192.168.30.91
Oct 2 15:20:26 (none) auth.info sshd[3660]: Did not receive identification string from 192.168.30.91
Oct 2 15:20:30 (none) auth.info sshd[3663]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus
Oct 2 15:20:34 (none) auth.info sshd[3663]: Failed password for root from 192.168.30.91 port 15754 ssh2
Oct 2 15:20:37 (none) auth.err sshd[3663]: error: PAM: Permission denied for root from 192.168.30.91
Oct 2 15:20:37 (none) auth.info sshd[3663]: Connection closed by 192.168.30.91 [preauth]
Oct 2 19:16:09 (none) auth.info sshd[8502]: Did not receive identification string from 192.168.30.91
Oct 2 23:16:11 (none) auth.info sshd[13431]: Did not receive identification string from 192.168.30.91
Oct 3 03:16:20 (none) auth.info sshd[18345]: Did not receive identification string from 192.168.30.91
Oct 3 07:15:14 (none) auth.info sshd[23234]: Did not receive identification string from 192.168.30.91
Oct 3 11:16:21 (none) auth.info sshd[28174]: Did not receive identification string from 192.168.30.91
Oct 3 11:20:37 (none) auth.info sshd[28266]: Did not receive identification string from 192.168.30.91
Oct 3 11:20:41 (none) auth.info sshd[28269]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus
Oct 3 11:20:44 (none) auth.info sshd[28269]: Failed password for root from 192.168.30.91 port 46661 ssh2
Oct 3 11:20:48 (none) auth.err sshd[28269]: error: PAM: Permission denied for root from 192.168.30.91
Oct 3 11:20:48 (none) auth.info sshd[28269]: Connection closed by 192.168.30.91 [preauth]
Oct 3 12:05:00 (none) user.warn kernel: sched: RT throttling activated
Oct 3 12:05:00 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:21 (none) user.warn kernel: ------------[ cut here ]------------
Oct 3 12:05:21 (none) user.warn kernel: WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0x15c/0x24c()
Oct 3 12:05:21 (none) user.info kernel: NETDEV WATCHDOG: mcmc (): transmit queue 0 timed out
Oct 3 12:05:21 (none) user.warn kernel: Modules linked in: mcmclink g_serial ocores_udc mcfulink mooseproc mcscbridge msgdrv
Oct 3 12:05:21 (none) user.warn kernel: [<c0014428>] (unwind_backtrace+0x0/0xec) from [<c02a6c50>] (dump_stack+0x20/0x24)
Oct 3 12:05:21 (none) user.warn kernel: [<c02a6c50>] (dump_stack+0x20/0x24) from [<c001bf60>] (warn_slowpath_common+0x5c/0x74)
Oct 3 12:05:21 (none) user.warn kernel: [<c001bf60>] (warn_slowpath_common+0x5c/0x74) from [<c001c034>] (warn_slowpath_fmt+0x40/0x48)
Oct 3 12:05:21 (none) user.warn kernel: [<c001c034>] (warn_slowpath_fmt+0x40/0x48) from [<c022a1e4>] (dev_watchdog+0x15c/0x24c)
Oct 3 12:05:21 (none) user.warn kernel: [<c022a1e4>] (dev_watchdog+0x15c/0x24c) from [<c00281b8>] (run_timer_softirq+0x1d0/0x2dc)
Oct 3 12:05:21 (none) user.warn kernel: [<c00281b8>] (run_timer_softirq+0x1d0/0x2dc) from [<c0021cfc>] (__do_softirq+0xd8/0x1c0)
Oct 3 12:05:21 (none) user.warn kernel: [<c0021cfc>] (__do_softirq+0xd8/0x1c0) from [<c002219c>] (irq_exit+0x50/0x5c)
Oct 3 12:05:21 (none) user.warn kernel: [<c002219c>] (irq_exit+0x50/0x5c) from [<c000f750>] (handle_IRQ+0x84/0xa4)
Oct 3 12:05:21 (none) user.warn kernel: [<c000f750>] (handle_IRQ+0x84/0xa4) from [<c00086b8>] (asm_do_IRQ+0x18/0x1c)
Oct 3 12:05:21 (none) user.warn kernel: [<c00086b8>] (asm_do_IRQ+0x18/0x1c) from [<c000e55c>] (__irq_usr+0x3c/0x80)
Oct 3 12:05:21 (none) user.warn kernel: Exception stack(0xd5e5bfb0 to 0xd5e5bff8)
Oct 3 12:05:21 (none) user.warn kernel: bfa0: 001cc5f8 80000163 00000008 4390de30
Oct 3 12:05:21 (none) user.warn kernel: bfc0: 43aa46c0 00271970 41a2e8b0 b60fe65c 3bf37a15 43a7d83c 00000000 b60fe09c
Oct 3 12:05:21 (none) user.warn kernel: bfe0: 43946d98 b60fe088 41e66154 4390de30 20000010 ffffffff
Oct 3 12:05:21 (none) user.warn kernel: ---[ end trace 3867a107f846c95a ]---
Oct 3 12:05:21 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:21 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:21 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:30 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:31 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:33 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:39 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:40 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:53 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:55 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:05:59 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:00 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:04 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:05 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:06 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:11 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:13 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:17 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:19 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:23 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:24 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:29 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))
Oct 3 12:06:42 (none) user.warn kernel: MCMC: error status (0x5f) - Message timed out. (Inter MC link message(0x17))
Oct 3 12:06:53 (none) user.warn kernel: MCMC: error status (0x5f) - Message timed out. (Inter MC link message(0x17))
Oct 3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:06:54 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:06:59 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:07:00 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-06-2017 12:26 PM
10-06-2017 12:26 PM
Re: HP MSA 2040 SAN crashing
Oct 3 12:07:05 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
THIS GOES ON FOREVER!!!
Oct 3 12:26:39 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:26:40 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Jan 1 00:00:33 192 syslog.info syslogd started: BusyBox v1.19.3-GPM105P01-01-os-svn3104
Jan 1 00:00:33 192 user.notice kernel: klogd started: BusyBox v1.19.3-GPM105P01-01-os-svn3104 (2014-04-11 20:02:11 MDT)
Jan 1 00:00:33 192 user.info kernel: Bulk Command S 0x43425355 T 0x5 L 8 F 128 Trg 0 LUN 0 CL 10
Jan 1 00:00:33 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Jan 1 00:00:33 192 user.debug kernel: usb-storage: -- transfer complete
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Jan 1 00:00:33 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Status code 0; transferred 8/8
Jan 1 00:00:33 192 user.debug kernel: usb-storage: -- transfer complete
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Attempting to get CSW...
Jan 1 00:00:33 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Jan 1 00:00:33 192 user.debug kernel: usb-storage: -- transfer complete
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Bulk status result = 0
Jan 1 00:00:33 192 user.notice root: init: System logging initiated
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
Jan 1 00:00:33 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Jan 1 00:00:33 192 user.debug kernel: usb-storage: *** thread sleeping.
Jan 1 00:00:33 192 user.debug kernel: usb-storage: queuecommand_lck called
Jan 1 00:00:33 192 user.notice kernel: sd 0:0:0:0: [sda] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
Jan 1 00:00:33 192 user.debug kernel: usb-storage: *** thread awakened.
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Bad target number (3:0)
Jan 1 00:00:33 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000
Jan 1 00:00:33 192 user.debug kernel: usb-storage: *** thread sleeping.
Jan 1 00:00:33 192 user.debug kernel: usb-storage: queuecommand_lck called
Jan 1 00:00:33 192 user.debug kernel: usb-storage: *** thread awakened.
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)
Jan 1 00:00:33 192 user.debug kernel: usb-storage: 1a 00 3f 00 c0 00
Jan 1 00:00:33 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x6 L 192 F 128 Trg 0 LUN 0 CL 6
Jan 1 00:00:34 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Jan 1 00:00:34 192 user.debug kernel: usb-storage: -- transfer complete
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Jan 1 00:00:34 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192
Jan 1 00:00:34 192 user.debug kernel: usb-storage: -- short read transfer
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Attempting to get CSW...
Jan 1 00:00:34 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Jan 1 00:00:34 192 user.debug kernel: usb-storage: -- transfer complete
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Bulk status result = 0
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0
Jan 1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.
Jan 1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.
Jan 1 00:00:34 192 user.notice root: init: Crond started
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Bad target number (4:0)
Jan 1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.
Jan 1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Bad target number (5:0)
Jan 1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.
Jan 1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Bad target number (6:0)
Jan 1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.
Jan 1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Bad target number (7:0)
Jan 1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.
Jan 1 00:00:34 192 user.debug kernel: usb-storage 1-1:1.0: scan complete
Jan 1 00:00:34 192 user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 1 00:00:34 192 user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Jan 1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called
Jan 1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)
Jan 1 00:00:34 192 user.debug kernel: usb-storage: 1a 00 3f 00 c0 00
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x7 L 192 F 128 Trg 0 LUN 0 CL 6
Jan 1 00:00:34 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 1 00:00:34 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Jan 1 00:00:34 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-06-2017 12:27 PM
10-06-2017 12:27 PM
Re: HP MSA 2040 SAN crashing
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] No Caching mode page present
Oct 3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.notice root: init: read system time from file
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 00 00 00 00 00 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 1e 00 00 00 01 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x9 L 0 F 0 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x1
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transport indicates command failure
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Issuing auto-REQUEST_SENSE
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xa L 18 F 128 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 18/18
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- Result from auto-sense is 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x2
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 00 00 00 00 00 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xb L 0 F 0 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command READ_CAPACITY (10 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xc L 8 F 128 Trg 0 LUN 0 CL 10
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 8/8
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 1a 00 3f 00 c0 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xd L 192 F 128 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.notice root: hotplug net
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)
Oct 3 12:26:00 192 user.notice root: hotplug module
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 1a 00 3f 00 c0 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xe L 192 F 128 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.notice root: hotplug queues
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Oct 3 12:26:00 192 user.notice root: hotplug queues
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192
Oct 3 12:26:00 192 user.notice root: hotplug net
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] No Caching mode page present
Oct 3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command READ_10 (10 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 28 00 00 00 00 00 00 00 08 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xf L 4096 F 128 Trg 0 LUN 0 CL 10
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-06-2017 12:27 PM
10-06-2017 12:27 PM
Re: HP MSA 2040 SAN crashing
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 4096/4096
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.info kernel: sda: sda1
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 00 00 00 00 00 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x10 L 0 F 0 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 00 00 00 00 00 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x11 L 0 F 0 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command READ_CAPACITY (10 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x12 L 8 F 128 Trg 0 LUN 0 CL 10
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 8/8
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 1a 00 3f 00 c0 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x13 L 192 F 128 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)
Oct 3 12:26:00 192 user.debug kernel: usb-storage: 1a 00 3f 00 c0 00
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x14 L 192 F 128 Trg 0 LUN 0 CL 6
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...
Oct 3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13
Oct 3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0
Oct 3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.
Oct 3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] No Caching mode page present
Oct 3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Oct 3 12:26:00 192 user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Oct 3 12:26:00 192 user.warn kernel: MCMC Link: Initialization started.
Oct 3 12:26:00 192 user.warn kernel: mcmc_init_payloads called
Oct 3 12:26:00 192 user.warn kernel: mcmc_init_payloads done
Oct 3 12:26:00 192 user.warn kernel: MCMC: mac address a:d3:75:50:8a:8a
Oct 3 12:26:00 192 user.info kernel: mcmc_init called.
Oct 3 12:26:00 192 user.warn kernel: MCMC: starting mcmc_recv thread.
Oct 3 12:26:00 192 user.warn kernel: MCMC Link: Initialization successful. (slot = 0 mcmc_debug = 0x0)
Oct 3 12:26:02 192 user.notice root: init: initialize mcmc link
Oct 3 12:26:02 192 user.warn kernel: mcmc_open called
Oct 3 12:26:02 192 user.warn kernel: mcmc_open done
Oct 3 12:26:02 192 user.notice root: init: Starting base services
Oct 3 12:26:03 192 user.notice root: init: portmap and rpcd starting
Oct 3 12:26:03 192 user.notice root: init: pfud starting
Oct 3 12:26:03 192 user.notice root: init: watcherd starting
Oct 3 12:26:03 192 user.notice root: init: getting/setting system clock (NTP or CAPI)
Oct 3 12:26:03 192 user.notice root: systime.srv: CAPI time management configured
Oct 3 12:26:04 192 user.info kernel: watchdog: timeout set to 900 seconds
Oct 3 12:26:04 192 user.info kernel: watchdog: keepalive string changed to: 1915
Oct 3 12:26:04 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:26:05 192 user.warn kernel: ------------[ cut here ]------------
Oct 3 12:26:05 192 user.warn kernel: WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0x15c/0x24c()
Oct 3 12:26:05 192 user.info kernel: NETDEV WATCHDOG: mcmc (): transmit queue 0 timed out
Oct 3 12:26:05 192 user.warn kernel: Modules linked in: mcmclink g_serial ocores_udc mcfulink mooseproc mcscbridge msgdrv
Oct 3 12:26:05 192 user.warn kernel: [<c0014428>] (unwind_backtrace+0x0/0xec) from [<c02a6c50>] (dump_stack+0x20/0x24)
Oct 3 12:26:05 192 user.warn kernel: [<c02a6c50>] (dump_stack+0x20/0x24) from [<c001bf60>] (warn_slowpath_common+0x5c/0x74)
Oct 3 12:26:05 192 user.warn kernel: [<c001bf60>] (warn_slowpath_common+0x5c/0x74) from [<c001c034>] (warn_slowpath_fmt+0x40/0x48)
Oct 3 12:26:05 192 user.warn kernel: [<c001c034>] (warn_slowpath_fmt+0x40/0x48) from [<c022a1e4>] (dev_watchdog+0x15c/0x24c)
Oct 3 12:26:05 192 user.warn kernel: [<c022a1e4>] (dev_watchdog+0x15c/0x24c) from [<c00281b8>] (run_timer_softirq+0x1d0/0x2dc)
Oct 3 12:26:05 192 user.warn kernel: [<c00281b8>] (run_timer_softirq+0x1d0/0x2dc) from [<c0021cfc>] (__do_softirq+0xd8/0x1c0)
Oct 3 12:26:05 192 user.warn kernel: [<c0021cfc>] (__do_softirq+0xd8/0x1c0) from [<c002219c>] (irq_exit+0x50/0x5c)
Oct 3 12:26:05 192 user.warn kernel: [<c002219c>] (irq_exit+0x50/0x5c) from [<c000f750>] (handle_IRQ+0x84/0xa4)
Oct 3 12:26:05 192 user.warn kernel: [<c000f750>] (handle_IRQ+0x84/0xa4) from [<c00086b8>] (asm_do_IRQ+0x18/0x1c)
Oct 3 12:26:05 192 user.warn kernel: [<c00086b8>] (asm_do_IRQ+0x18/0x1c) from [<c000e394>] (__irq_svc+0x34/0x80)
Oct 3 12:26:05 192 user.warn kernel: Exception stack(0xc03e7f50 to 0xc03e7f98)
Oct 3 12:26:05 192 user.warn kernel: 7f40: 00000000 0005317f 0005217f 60000013
Oct 3 12:26:05 192 user.warn kernel: 7f60: c03e86c8 00000000 c07400e0 c03eb1fc 49804000 41069265 49bd4dc4 c03e7fa4
Oct 3 12:26:05 192 user.warn kernel: 7f80: 600000d3 c03e7f98 c000f8ec c000f8f8 60000013 ffffffff
Oct 3 12:26:05 192 user.warn kernel: [<c000e394>] (__irq_svc+0x34/0x80) from [<c000f8f8>] (default_idle+0x3c/0x40)
Oct 3 12:26:05 192 user.warn kernel: [<c000f8f8>] (default_idle+0x3c/0x40) from [<c000fad0>] (cpu_idle+0x60/0xb4)
Oct 3 12:26:05 192 user.warn kernel: [<c000fad0>] (cpu_idle+0x60/0xb4) from [<c02a42c4>] (rest_init+0x68/0x80)
Oct 3 12:26:05 192 user.warn kernel: [<c02a42c4>] (rest_init+0x68/0x80) from [<c03be7a0>] (start_kernel+0x2a8/0x300)
Oct 3 12:26:05 192 user.warn kernel: ---[ end trace a23a7dd6032bcd40 ]---
Oct 3 12:26:05 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:26:06 192 user.info kernel: eth0: link up (1000/Full)
Oct 3 12:26:07 192 user.notice root: init: Calling next rcS script
Oct 3 12:26:07 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:26:07 192 daemon.info init: starting pid 1987, tty '': '/sbin/getty -L ttyGS0 9600 vt100'
Oct 3 12:26:07 192 user.debug kernel: gs_open: ttyGS0 (c1c61c00,d6e83e80)
Oct 3 12:26:09 192 user.notice root: Starting logc
Oct 3 12:26:10 192 user.notice root: Starting appsv
Oct 3 12:26:24 192 user.notice root: hotplug queues
Oct 3 12:26:24 192 user.notice root: hotplug net
Oct 3 12:26:25 192 user.notice root: Starting web
Oct 3 12:26:26 192 user.notice root: hotplug net
Oct 3 12:26:26 192 user.notice root: hotplug queues
Oct 3 12:26:32 192 user.notice root: Starting slpd
Oct 3 12:26:33 192 user.notice root: Starting sfcbd
Oct 3 12:26:35 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:26:35 192 user.notice root: Starting snmpd
Oct 3 12:26:43 192 ftp.err pure-ftpd: (?@?) [ERROR] Unable to start a standalone server: [Address already in use]
Oct 3 12:26:50 192 user.notice root: systime.srv: Stopping NTP client if running
Oct 3 12:26:56 192 auth.info sshd[2421]: Server listening on 0.0.0.0 port 22.
Oct 3 12:27:05 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:27:35 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:27:49 192 user.notice root: hotplug queues
Oct 3 12:27:49 192 user.notice root: hotplug net
Oct 3 12:27:51 192 user.notice root: hotplug net
Oct 3 12:27:51 192 user.notice root: hotplug queues
Oct 3 12:28:05 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:28:07 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:28:09 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:28:11 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:28:13 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:28:17 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:28:18 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:28:23 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:28:24 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Oct 3 12:28:29 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))
Jan 1 00:00:33 192 syslog.info syslogd started: BusyBox v1.19.3-GPM105P01-01-os-svn3104
Jan 1 00:00:33 192 user.notice kernel: vmalloc : 0xd8800000 - 0xff000000 ( 616 MB)
Jan 1 00:00:33 192 user.notice kernel: lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
Jan 1 00:00:33 192 user.notice kernel: modules : 0xbf000000 - 0xc0000000 ( 16 MB)
Jan 1 00:00:33 192 user.notice kernel: .text : 0xc0008000 - 0xc03bd9f0 (3799 kB)
Jan 1 00:00:33 192 user.notice kernel: .init : 0xc03be000 - 0xc03e6000 ( 160 kB)
Jan 1 00:00:33 192 user.notice kernel: .data : 0xc03e6000 - 0xc0408440 ( 138 kB)
Jan 1 00:00:33 192 user.notice kernel: .bss : 0xc0408464 - 0xc043ee3c ( 219 kB)
Jan 1 00:00:33 192 user.info kernel: SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan 1 00:00:33 192 user.info kernel: NR_IRQS:32
Jan 1 00:00:33 192 user.info kernel: sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
Jan 1 00:00:33 192 user.info kernel: Console: colour dummy device 80x30
Jan 1 00:00:33 192 user.info kernel: Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
Jan 1 00:00:33 192 user.info kernel: pid_max: default: 32768 minimum: 301
Jan 1 00:00:33 192 user.info kernel: Mount-cache hash table entries: 512
Jan 1 00:00:33 192 user.notice root: init: System logging initiated
Jan 1 00:00:33 192 user.info kernel: CPU: Testing write buffer coherency: ok
Jan 1 00:00:33 192 user.info kernel: ftrace: allocating 11785 entries in 35 pages
Jan 1 00:00:33 192 user.info kernel: Setting up static identity map for 0x49aabb28 - 0x49aabb64
Jan 1 00:00:33 192 user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:33 192 user.info kernel: L210 cache controller enabled
Jan 1 00:00:33 192 user.info kernel: l2x0: 8 ways, CACHE_ID 0x4100544f, AUX_CTRL 0x00350249, Cache size: 262144 B
Jan 1 00:00:33 192 user.warn kernel: IRQR_ARM0_IRQ_ENA=0x80000000
Jan 1 00:00:33 192 user.warn kernel: IRQR_ARM0_SERIAL_IRQ_ENA=0x11
Jan 1 00:00:33 192 user.warn kernel: SPI_CTRL_PTR=0x408
Jan 1 00:00:33 192 user.warn kernel: dhs_udc_init:
Jan 1 00:00:33 192 user.info kernel: bio: create slab <bio-0> at 0
Jan 1 00:00:33 192 user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:33 192 user.info kernel: usbcore: registered new interface driver usbfs
Jan 1 00:00:33 192 user.info kernel: usbcore: registered new interface driver hub
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-06-2017 12:28 PM
10-06-2017 12:28 PM
Re: HP MSA 2040 SAN crashing
Jan 1 00:00:33 192 user.info kernel: usbcore: registered new device driver usb
Jan 1 00:00:33 192 user.info kernel: Switching to clocksource moose_clksrc
Jan 1 00:00:33 192 user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:33 192 user.info kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:33 192 user.info kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Jan 1 00:00:33 192 user.info kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:33 192 user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:33 192 user.info kernel: TCP reno registered
Jan 1 00:00:33 192 user.info kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:33 192 user.info kernel: UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:33 192 user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:33 192 user.info kernel: RPC: Registered named UNIX socket transport module.
Jan 1 00:00:33 192 user.notice root: init: Crond started
Jan 1 00:00:33 192 user.info kernel: RPC: Registered udp transport module.
Jan 1 00:00:33 192 user.info kernel: RPC: Registered tcp transport module.
Jan 1 00:00:33 192 user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 00:00:33 192 user.info kernel: Trying to unpack rootfs image as initramfs...
Jan 1 00:00:33 192 user.info kernel: Freeing initrd memory: 4608K
Jan 1 00:00:33 192 user.warn kernel: NetWinder Floating Point Emulator V0.97 (double precision)
Jan 1 00:00:33 192 user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 1 00:00:33 192 user.info kernel: JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Jan 1 00:00:33 192 user.info kernel: msgmni has been set to 752
Jan 1 00:00:33 192 user.info kernel: io scheduler noop registered (default)
Jan 1 00:00:33 192 user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 1 00:00:33 192 user.info kernel: serial8250.0: ttyS0 at MMIO 0xffff0000 (irq = 3) is a 16550A
Jan 1 00:00:33 192 user.info kernel: console [ttyS0] enabled
Jan 1 00:00:33 192 user.info kernel: serial8250.0: ttyS1 at MMIO 0xfff88800 (irq = 31) is a 16550A
Jan 1 00:00:33 192 user.info kernel: brd: module loaded
Jan 1 00:00:33 192 user.notice kernel: Moose flash device: 0x3fe0000 bytes at physical location 0xf8000000
Jan 1 00:00:33 192 user.info kernel: Moose Flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x008965
Jan 1 00:00:33 192 user.warn kernel: NOR chip too large to fit in mapping. Attempting to cope...
Jan 1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A
Jan 1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A
Jan 1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A
Jan 1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A
Jan 1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A
Jan 1 00:00:33 192 user.info kernel: Using buffer write method
Jan 1 00:00:33 192 user.info kernel: Using auto-unlock on power-up/resume
Jan 1 00:00:33 192 user.notice kernel: cfi_cmdset_0001: Erase suspend on write enabled
Jan 1 00:00:33 192 user.debug kernel: erase region 0: offset=0x0,size=0x8000,blocks=4
Jan 1 00:00:33 192 user.debug kernel: erase region 1: offset=0x20000,size=0x20000,blocks=511
Jan 1 00:00:33 192 user.warn kernel: Reducing visibility of 65536KiB chip to 65408KiB
Jan 1 00:00:33 192 user.notice kernel: Creating 9 MTD partitions on "Moose Flash":
Jan 1 00:00:33 192 user.notice kernel: 0x000000018000-0x000000020000 : "mc boot meta"
Jan 1 00:00:33 192 user.notice kernel: 0x000000020000-0x000000220000 : "loader"
Jan 1 00:00:33 192 user.notice kernel: 0x000000000000-0x000000008000 : "loader meta"
Jan 1 00:00:33 192 user.notice kernel: 0x000000008000-0x000000018000 : "spare meta"
Jan 1 00:00:33 192 user.notice kernel: 0x000000c00000-0x000003900000 : "app"
Jan 1 00:00:33 192 user.notice kernel: 0x000000220000-0x000000c00000 : "log"
Jan 1 00:00:33 192 user.notice kernel: 0x000003900000-0x000003fe0000 : "cfg"
Jan 1 00:00:33 192 user.notice kernel: 0x000000000000-0x000003fe0000 : "all"
Jan 1 00:00:33 192 user.notice kernel: 0x000000220000-0x000003fe0000 : "kialc"
Jan 1 00:00:33 192 user.info kernel: m25p80 spi0.0: w25q128 (16384 Kbytes)
Jan 1 00:00:33 192 user.notice kernel: 3 cmdlinepart partitions found on MTD device spi0.0
Oct 3 12:28:00 192 user.notice kernel: Creating 3 MTD partitions on "spi0.0":
Oct 3 12:28:00 192 user.notice kernel: 0x000000000000-0x000000600000 : "bootloader"
Oct 3 12:28:00 192 user.notice kernel: 0x000000600000-0x000000900000 : "kernel"
Oct 3 12:28:00 192 user.notice kernel: 0x000000900000-0x000001000000 : "initramfs"
Oct 3 12:28:00 192 user.info kernel: f_mac3h_gmii_bus: probed
Oct 3 12:28:00 192 user.info kernel: eth0: Fujitsu MAC3H at 0xfffa0000 irq 5 (00:c0:ff:19:e9:c0)
Oct 3 12:28:00 192 user.info kernel: eth0: attached PHY driver [ET1011C] (gmii_bus:phy_addr=mac3h-ffffffff:10, irq=-1)
Oct 3 12:28:00 192 user.info kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
Oct 3 12:28:00 192 user.info kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 3 12:28:00 192 user.info kernel: SLIP linefill/keepalive option.
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, 19 Sep 2007
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, starting ohs900h_probe
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, ioremap addr->start = 0xFFFF7000, resource_len(addr) = 0x100
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, setting addr_reg to ioremap_nocache(addr->start = 0xFFFF7000) == 0xFEFF7000
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, allocating memory
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, spin_lock_init
Oct 3 12:28:00 192 user.notice root: init: read system time from file
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, ohs900->addr_reg = 0xfeff7000, OHS900_HWREVREG = 0xe1
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, started port_power, usb hw version = 32
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, setting ohs900->ctrl1
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, disabling interrupts
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, clearing interrupt status
Oct 3 12:28:00 192 user.info kernel: ohs900: ohs900->board: c03fe86c, ohs900->board->port_power: c01e9670
Oct 3 12:28:00 192 user.warn kernel: power off
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, inside stubbed sm3k_port_power
Oct 3 12:28:00 192 user.info kernel: ohs900: Resetting core: 0
Oct 3 12:28:00 192 user.info kernel: ohs900: port_power: 0
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, OHS900_IRQ_ENABLE = 0
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, returned from port_power
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, returned from spin_unlock_irqrestore
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, getting hw version
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, hw version = 32
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, speed: 10
Oct 3 12:28:00 192 user.info kernel: ohs900-hcd ohs900-hcd: OHS900 v2.0
Oct 3 12:28:00 192 user.info kernel: ohs900-hcd ohs900-hcd: new USB bus registered, assigned bus number 1
Oct 3 12:28:00 192 user.info kernel: ohs900-hcd ohs900-hcd: irq 7, io base 0xffff7000
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, ohs900->addr_reg = 0xfeff7000, OHS900_HWREVREG = 0xe1
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, started port_power, usb hw version = 32
Oct 3 12:28:00 192 user.warn kernel: port_power: 0
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, setting ohs900->ctrl1
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, disabling interrupts
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, clearing interrupt status
Oct 3 12:28:00 192 user.info kernel: ohs900: ohs900->board: c03fe86c, ohs900->board->port_power: c01e9670
Oct 3 12:28:00 192 user.warn kernel: power on
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, inside stubbed sm3k_port_power
Oct 3 12:28:00 192 user.info kernel: ohs900: Resetting core: 0
Oct 3 12:28:00 192 user.info kernel: ohs900: port_power: 1
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, OHS900_IRQ_ENABLE = 4
Oct 3 12:28:00 192 user.debug kernel: usb usb1: default language 0x0409
Oct 3 12:28:00 192 user.debug kernel: usb usb1: udev 1, busnum 1, minor = 0
Oct 3 12:28:00 192 user.info kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Oct 3 12:28:00 192 user.info kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 3 12:28:00 192 user.info kernel: usb usb1: Product: OHS900 v2.0
Oct 3 12:28:00 192 user.info kernel: usb usb1: Manufacturer: Linux 3.3.6-GPM105P01-01-os-svn3084 ohs900-hcd
Oct 3 12:28:00 192 user.info kernel: usb usb1: SerialNumber: ohs900-hcd
Oct 3 12:28:00 192 user.debug kernel: usb usb1: usb_probe_device
Oct 3 12:28:00 192 user.debug kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 3 12:28:00 192 user.debug kernel: usb usb1: adding 1-0:1.0 (config #1, interface 0)
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: usb_probe_interface
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: usb_probe_interface - got id
Oct 3 12:28:00 192 user.info kernel: hub 1-0:1.0: USB hub found
Oct 3 12:28:00 192 user.info kernel: hub 1-0:1.0: 1 port detected
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: standalone hub
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: individual port power switching
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: no over-current protection
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: power on to power good time: 20ms
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: local power source is good
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: enabling power on all ports
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, ohs900->addr_reg = 0xfeff7000, OHS900_HWREVREG = 0xe1
Oct 3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, started port_power, usb hw version = 32
Oct 3 12:28:00 192 user.warn kernel: port_power: 10101
Oct 3 12:28:00 192 user.info kernel: ohs900: OHS900 v2.0, irq 7
Oct 3 12:28:00 192 user.info kernel: Initializing USB Mass Storage driver...
Oct 3 12:28:00 192 user.info kernel: usbcore: registered new interface driver usb-storage
Oct 3 12:28:00 192 user.info kernel: USB Mass Storage support registered.
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00010101, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: port 1: status 0101 change 0001
Oct 3 12:28:00 192 user.info kernel: usbcore: registered new interface driver libusual
Oct 3 12:28:00 192 user.info kernel: mousedev: PS/2 mouse device common for all mice
Oct 3 12:28:00 192 user.info kernel: i2c /dev entries driver
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00000101, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
Oct 3 12:28:00 192 user.info kernel: usbcore: registered new interface driver usbhid
Oct 3 12:28:00 192 user.info kernel: usbhid: USB HID core driver
Oct 3 12:28:00 192 user.info kernel: TCP cubic registered
Oct 3 12:28:00 192 user.info kernel: NET: Registered protocol family 17
Oct 3 12:28:00 192 user.notice kernel: Registering the dns_resolver key type
Oct 3 12:28:00 192 user.debug kernel: ohs900: end reset
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.info kernel: usb 1-1: new full-speed USB device number 2 using ohs900-hcd
Oct 3 12:28:00 192 user.info kernel: Freeing init memory: 160K
Oct 3 12:28:00 192 user.debug kernel: ohs900: end reset
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.err kernel: usb 1-1: device descriptor read/64, error -62
Oct 3 12:28:00 192 user.debug kernel: ohs900: end reset
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.err kernel: usb 1-1: device descriptor read/64, error -62
Oct 3 12:28:00 192 user.debug kernel: ohs900: end reset
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.info kernel: usb 1-1: new full-speed USB device number 3 using ohs900-hcd
Oct 3 12:28:00 192 user.info kernel: Installing mailbox message driver
Oct 3 12:28:00 192 user.info kernel: Mailbox message driver version 1.00.2014-04-11.20:01 installed.
Oct 3 12:28:00 192 user.debug kernel: ohs900: end reset
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.info kernel: Installing Bridge Driver
Oct 3 12:28:00 192 user.info kernel: Bridge: Initializing Pipes.
Oct 3 12:28:00 192 user.info kernel: Bridge: Init CAPI0 pipe, op 1, minor 0, size 524288, shmem phys = 41061000
Oct 3 12:28:00 192 user.info kernel: Bridge: Init tMUI pipe, op 2, minor 4, size 10240, shmem phys = 41127800
Oct 3 12:28:00 192 user.info kernel: Bridge: Init COM1 pipe, op 11, minor 1, size 131072, shmem phys = 410e2000
Oct 3 12:28:00 192 user.info kernel: Bridge: Init COM2 pipe, op 12, minor 2, size 131072, shmem phys = 410e5800
Oct 3 12:28:00 192 user.info kernel: Bridge: Init COM3 pipe, op 13, minor 3, size 131072, shmem phys = 41106800
Oct 3 12:28:00 192 user.info kernel: Bridge: Init COM4 pipe, op 14, minor 5, size 131072, shmem phys = 41148800
Oct 3 12:28:00 192 user.info kernel: Bridge: Init CAPI6 pipe, op 3, minor 6, size 524288, shmem phys = 41169800
Oct 3 12:28:00 192 user.info kernel: Bridge: Init CAPI7 pipe, op 4, minor 7, size 524288, shmem phys = 411ea800
Oct 3 12:28:00 192 user.info kernel: Bridge: Init CAPI8 pipe, op 5, minor 8, size 524288, shmem phys = 4126b800
Oct 3 12:28:00 192 user.info kernel: Bridge: Init CAPI9 pipe, op 6, minor 9, size 524288, shmem phys = 412ec800
Oct 3 12:28:00 192 user.info kernel: Bridge Driver Version G03.2014-04-11.20:01 Installed at Major 150
Oct 3 12:28:00 192 user.err kernel: usb 1-1: device descriptor read/64, error -62
Oct 3 12:28:00 192 user.info kernel: starting moose_watchdog thread.
Oct 3 12:28:00 192 user.notice root: hotplug module
Oct 3 12:28:00 192 user.info kernel: moose watchdog enabled. timeout = 42 sec.
Oct 3 12:28:00 192 user.info kernel: Bridge installation complete
Oct 3 12:28:00 192 user.info kernel: mooseproc loaded. version: G01.2014-04-11.20:01
Oct 3 12:28:00 192 user.warn kernel: mcfu link: Initialization started, driver version 3.00.2014-04-11.20:01.
Oct 3 12:28:00 192 user.warn kernel: mcfu link: Initialization successful.
Oct 3 12:28:00 192 user.debug kernel: ohs900: end reset
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.notice root: hotplug net
Oct 3 12:28:00 192 user.debug kernel: eng:udc: no VBUS detection, assuming always-on
Oct 3 12:28:00 192 user.info kernel: udc: ocores-udc version 1.0
Oct 3 12:28:00 192 user.err kernel: usb 1-1: device descriptor read/64, error -62
Oct 3 12:28:00 192 user.debug kernel: udc ocores-udc.0: registering UDC driver [g_serial]
Oct 3 12:28:00 192 user.debug kernel: gserial_setup: registered 1 ttyGS* device
Oct 3 12:28:00 192 user.debug kernel: g_serial gadget: adding config #2 'CDC ACM config'/bf035c98
Oct 3 12:28:00 192 user.debug kernel: g_serial gadget: adding 'acm'/d6ba1840 to config 'CDC ACM config'/bf035c98
Oct 3 12:28:00 192 user.debug kernel: g_serial gadget: acm ttyGS0: dual speed IN/ep1 OUT/ep2 NOTIFY/ep3
Oct 3 12:28:00 192 user.notice root: hotplug queues
Oct 3 12:28:00 192 user.debug kernel: g_serial gadget: cfg 2/bf035c98 speeds: high full
Oct 3 12:28:00 192 user.debug kernel: g_serial gadget: interface 0 = acm/d6ba1840
Oct 3 12:28:00 192 user.debug kernel: g_serial gadget: interface 1 = acm/d6ba1840
Oct 3 12:28:00 192 user.info kernel: g_serial gadget: Gadget Serial v2.4
Oct 3 12:28:00 192 user.info kernel: g_serial gadget: g_serial ready
Oct 3 12:28:00 192 user.debug kernel: ohs900: end reset
Oct 3 12:28:00 192 user.notice root: hotplug queues
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.notice root: hotplug net
Oct 3 12:28:00 192 user.info kernel: usb 1-1: new full-speed USB device number 4 using ohs900-hcd
Oct 3 12:28:00 192 user.err kernel: usb 1-1: device not accepting address 4, error -62
Oct 3 12:28:00 192 user.debug kernel: ohs900: end reset
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.info kernel: usb 1-1: new full-speed USB device number 5 using ohs900-hcd
Oct 3 12:28:00 192 user.err kernel: usb 1-1: device not accepting address 5, error -62
Oct 3 12:28:00 192 user.err kernel: hub 1-0:1.0: unable to enumerate USB device on port 1
Oct 3 12:28:00 192 user.debug kernel: hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Oct 3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00000100, wIndex: 1, wLength: 4
Oct 3 12:28:00 192 user.warn kernel: MCMC Link: Initialization started.
Oct 3 12:28:00 192 user.warn kernel: mcmc_init_payloads called
Oct 3 12:28:00 192 user.warn kernel: mcmc_init_payloads done
Oct 3 12:28:00 192 user.warn kernel: MCMC: mac address f6:8d:19:be:7e:6d
Oct 3 12:28:00 192 user.info kernel: mcmc_init called.
Oct 3 12:28:00 192 user.warn kernel: MCMC: starting mcmc_recv thread.
Oct 3 12:28:00 192 user.warn kernel: MCMC Link: Initialization successful. (slot = 0 mcmc_debug = 0x0)
Oct 3 12:28:02 192 user.notice root: init: initialize mcmc link
Oct 3 12:28:02 192 user.warn kernel: mcmc_open called
Oct 3 12:28:02 192 user.warn kernel: mcmc_open done
Oct 3 12:28:02 192 user.notice root: init: Starting base services
Oct 3 12:28:03 192 user.notice root: init: portmap and rpcd starting
Oct 3 12:28:03 192 user.notice root: init: pfud starting
Oct 3 12:28:03 192 user.notice root: init: watcherd starting
Oct 3 12:28:03 192 user.notice root: init: getting/setting system clock (NTP or CAPI)
Oct 3 12:28:03 192 user.notice root: systime.srv: CAPI time management configured
Oct 3 12:28:04 192 user.notice root: init: Calling next rcS script
Oct 3 12:28:04 192 daemon.info init: starting pid 1961, tty '': '/sbin/getty -L ttyGS0 9600 vt100'
Oct 3 12:28:04 192 user.debug kernel: gs_open: ttyGS0 (d6add400,c1c29300)
Oct 3 12:28:04 192 user.info kernel: watchdog: timeout set to 900 seconds
Oct 3 12:28:04 192 user.info kernel: watchdog: keepalive string changed to: 1894
Oct 3 12:28:05 192 user.notice root: Starting logc
Oct 3 12:28:07 192 user.notice root: Starting appsv
Oct 3 12:28:07 192 user.info kernel: eth0: link up (1000/Full)
Oct 3 12:28:22 192 user.notice root: Starting web
Oct 3 12:28:29 192 user.notice root: Starting slpd
Oct 3 12:28:30 192 user.notice root: Starting sfcbd
Oct 3 12:28:33 192 user.notice root: Starting snmpd
Oct 3 12:28:40 192 ftp.err pure-ftpd: (?@?) [ERROR] Unable to start a standalone server: [Address already in use]
Oct 3 12:28:51 192 user.notice root: systime.srv: Stopping NTP client if running
Oct 3 12:32:49 192 auth.info sshd[2407]: Server listening on 0.0.0.0 port 22.
Oct 3 15:16:15 192 auth.info sshd[5741]: Did not receive identification string from 192.168.30.91
Oct 3 19:16:12 192 auth.info sshd[10186]: Did not receive identification string from 192.168.30.91
Oct 3 23:15:15 192 auth.info sshd[14855]: Did not receive identification string from 192.168.30.91
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2017 07:42 AM
10-09-2017 07:42 AM
Re: HP MSA 2040 SAN crashing
Hello,
Sorry, I'm sure this isn't the answer you were hoping for but I think you need to open a support case. My guess is that you have a failed/failing controller. You are also extremely far behind on the firmware. Updating the firmware may be part of the recommneded resolution by support but you'll need to follow a specific upgrade path to get to the latest (GL220P010) since you cannot do a direct upgrade from the version you are on.
Yes, it also appears that a certain server is trying to frequently login via SSH? Perhaps you have some sort of monitoring script installed and it's using an old password? I'd investigate on that host and see what is making the SSH call and why.
Sorry I couldn't be more helpful.
I work for HPE. The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.