HP MSA 2040 SAN crashing

[zeroecko]

I have an MSA 2040 SAN with dual controller and a second enclosure.  They have worked fine since I installed them in late 2014.  Tuesday, the SAN crashed, and the primary enclosure showed a fault light.  Trying to access the web interface said "Initialization failed".  I rebooted the system, and it came up normal and ran fine.  That is until today.  Same exact thing happened.  I have made no hardware or software changes in the last few weeks.

Below are my error logs from Enclosure A.  I can't really decipher what is going on.  It appears one of my servers is constantly trying to log into the SAN and failing.  I can't think of why it would be, and not sure if it is related.  I am only attaching up to the end of day on Oct 3, because today's logs are basically EXACTLY the same.

FIRMWARE:

Bundle Version: GL105P001-03

Storage Controller: GLS105R04-01

Storage Controller Loader: 27.015

Management Controller: GLM105R009-01

Management Controller Loader: 6.04.16617

Expander: 3117

CPLD: 42

Sep 28 11:22:36 (none) auth.info sshd[10081]: Failed password for root from 192.168.30.91 port 12452 ssh2

Sep 28 11:22:39 (none) auth.err sshd[10081]: error: PAM: Permission denied for root from 192.168.30.91

Sep 28 11:22:39 (none) auth.info sshd[10081]: Connection closed by 192.168.30.91 [preauth]

Sep 28 15:16:49 (none) auth.info sshd[14885]: Did not receive identification string from 192.168.30.91

Sep 28 15:27:50 (none) auth.info sshd[15114]: Did not receive identification string from 192.168.30.91

Sep 28 15:27:53 (none) auth.info sshd[15117]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus

Sep 28 15:27:56 (none) auth.info sshd[15117]: Failed password for root from 192.168.30.91 port 24622 ssh2

Sep 28 15:27:58 (none) auth.err sshd[15117]: error: PAM: Permission denied for root from 192.168.30.91

Sep 28 15:27:58 (none) auth.info sshd[15117]: Connection closed by 192.168.30.91 [preauth]

Sep 28 19:16:09 (none) auth.info sshd[19801]: Did not receive identification string from 192.168.30.91

Sep 28 23:16:17 (none) auth.info sshd[24725]: Did not receive identification string from 192.168.30.91

Sep 29 03:16:49 (none) auth.info sshd[29637]: Did not receive identification string from 192.168.30.91

Sep 29 07:16:54 (none) auth.info sshd[2104]: Did not receive identification string from 192.168.30.91

Sep 29 07:22:22 (none) auth.info sshd[2260]: Did not receive identification string from 192.168.30.91

Sep 29 07:22:26 (none) auth.info sshd[2263]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus

Sep 29 07:22:30 (none) auth.info sshd[2263]: Failed password for root from 192.168.30.91 port 14036 ssh2

Sep 29 07:22:34 (none) auth.err sshd[2263]: error: PAM: Permission denied for root from 192.168.30.91

Sep 29 07:22:34 (none) auth.info sshd[2263]: Connection closed by 192.168.30.91 [preauth]

Sep 29 11:16:50 (none) auth.info sshd[7142]: Did not receive identification string from 192.168.30.91

Sep 29 15:16:54 (none) auth.info sshd[12035]: Did not receive identification string from 192.168.30.91

Sep 29 19:16:07 (none) auth.info sshd[16928]: Did not receive identification string from 192.168.30.91

Sep 29 23:16:23 (none) auth.info sshd[21845]: Did not receive identification string from 192.168.30.91

Sep 30 03:16:49 (none) auth.info sshd[26769]: Did not receive identification string from 192.168.30.91

Sep 30 03:22:06 (none) auth.info sshd[26883]: Did not receive identification string from 192.168.30.91

Sep 30 03:22:10 (none) auth.info sshd[26886]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus

Sep 30 03:22:13 (none) auth.info sshd[26886]: Failed password for root from 192.168.30.91 port 15958 ssh2

Sep 30 03:22:17 (none) auth.err sshd[26886]: error: PAM: Permission denied for root from 192.168.30.91

Sep 30 03:22:17 (none) auth.info sshd[26886]: Connection closed by 192.168.30.91 [preauth]

Sep 30 07:15:32 (none) auth.info sshd[31672]: Did not receive identification string from 192.168.30.91

Sep 30 11:16:47 (none) auth.info sshd[4305]: Did not receive identification string from 192.168.30.91

Sep 30 11:22:00 (none) auth.info sshd[4410]: Did not receive identification string from 192.168.30.91

Sep 30 11:22:04 (none) auth.info sshd[4418]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus

Sep 30 11:22:07 (none) auth.info sshd[4418]: Failed password for root from 192.168.30.91 port 30993 ssh2

Sep 30 11:22:10 (none) auth.err sshd[4418]: error: PAM: Permission denied for root from 192.168.30.91

Sep 30 11:22:10 (none) auth.info sshd[4418]: Connection closed by 192.168.30.91 [preauth]

Sep 30 15:16:36 (none) auth.info sshd[9230]: Did not receive identification string from 192.168.30.91

Sep 30 19:16:10 (none) auth.info sshd[14139]: Did not receive identification string from 192.168.30.91

Sep 30 23:16:27 (none) auth.info sshd[19071]: Did not receive identification string from 192.168.30.91

Oct  1 03:16:44 (none) auth.info sshd[23985]: Did not receive identification string from 192.168.30.91

Oct  1 07:15:43 (none) auth.info sshd[28878]: Did not receive identification string from 192.168.30.91

Oct  1 11:16:56 (none) auth.info sshd[1336]: Did not receive identification string from 192.168.30.91

Oct  1 15:16:45 (none) auth.info sshd[6384]: Did not receive identification string from 192.168.30.91

Oct  1 19:16:07 (none) auth.info sshd[11289]: Did not receive identification string from 192.168.30.91

Oct  1 23:15:18 (none) auth.info sshd[16192]: Did not receive identification string from 192.168.30.91

Oct  1 23:19:21 (none) auth.info sshd[16279]: Did not receive identification string from 192.168.30.91

Oct  1 23:19:24 (none) auth.info sshd[16282]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus

Oct  1 23:19:28 (none) auth.info sshd[16282]: Failed password for root from 192.168.30.91 port 60828 ssh2

Oct  1 23:19:31 (none) auth.err sshd[16282]: error: PAM: Permission denied for root from 192.168.30.91

Oct  1 23:19:31 (none) auth.info sshd[16282]: Connection closed by 192.168.30.91 [preauth]

Oct  2 03:16:47 (none) auth.info sshd[21152]: Did not receive identification string from 192.168.30.91

Oct  2 07:15:43 (none) auth.info sshd[26046]: Did not receive identification string from 192.168.30.91

Oct  2 11:16:52 (none) auth.info sshd[30993]: Did not receive identification string from 192.168.30.91

Oct  2 15:16:14 (none) auth.info sshd[3574]: Did not receive identification string from 192.168.30.91

Oct  2 15:20:26 (none) auth.info sshd[3660]: Did not receive identification string from 192.168.30.91

Oct  2 15:20:30 (none) auth.info sshd[3663]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus

Oct  2 15:20:34 (none) auth.info sshd[3663]: Failed password for root from 192.168.30.91 port 15754 ssh2

Oct  2 15:20:37 (none) auth.err sshd[3663]: error: PAM: Permission denied for root from 192.168.30.91

Oct  2 15:20:37 (none) auth.info sshd[3663]: Connection closed by 192.168.30.91 [preauth]

Oct  2 19:16:09 (none) auth.info sshd[8502]: Did not receive identification string from 192.168.30.91

Oct  2 23:16:11 (none) auth.info sshd[13431]: Did not receive identification string from 192.168.30.91

Oct  3 03:16:20 (none) auth.info sshd[18345]: Did not receive identification string from 192.168.30.91

Oct  3 07:15:14 (none) auth.info sshd[23234]: Did not receive identification string from 192.168.30.91

Oct  3 11:16:21 (none) auth.info sshd[28174]: Did not receive identification string from 192.168.30.91

Oct  3 11:20:37 (none) auth.info sshd[28266]: Did not receive identification string from 192.168.30.91

Oct  3 11:20:41 (none) auth.info sshd[28269]: WARNING: /home/pablo/sandbox/heartbleed/GL105/platform/build.Gallium.GPM105P01-01.output/opt/etc/moduli does not exist, using fixed modulus

Oct  3 11:20:44 (none) auth.info sshd[28269]: Failed password for root from 192.168.30.91 port 46661 ssh2

Oct  3 11:20:48 (none) auth.err sshd[28269]: error: PAM: Permission denied for root from 192.168.30.91

Oct  3 11:20:48 (none) auth.info sshd[28269]: Connection closed by 192.168.30.91 [preauth]

Oct  3 12:05:00 (none) user.warn kernel: sched: RT throttling activated

Oct  3 12:05:00 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:21 (none) user.warn kernel: ------------[ cut here ]------------

Oct  3 12:05:21 (none) user.warn kernel: WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0x15c/0x24c()

Oct  3 12:05:21 (none) user.info kernel: NETDEV WATCHDOG: mcmc (): transmit queue 0 timed out

Oct  3 12:05:21 (none) user.warn kernel: Modules linked in: mcmclink g_serial ocores_udc mcfulink mooseproc mcscbridge msgdrv

Oct  3 12:05:21 (none) user.warn kernel: [<c0014428>] (unwind_backtrace+0x0/0xec) from [<c02a6c50>] (dump_stack+0x20/0x24)

Oct  3 12:05:21 (none) user.warn kernel: [<c02a6c50>] (dump_stack+0x20/0x24) from [<c001bf60>] (warn_slowpath_common+0x5c/0x74)

Oct  3 12:05:21 (none) user.warn kernel: [<c001bf60>] (warn_slowpath_common+0x5c/0x74) from [<c001c034>] (warn_slowpath_fmt+0x40/0x48)

Oct  3 12:05:21 (none) user.warn kernel: [<c001c034>] (warn_slowpath_fmt+0x40/0x48) from [<c022a1e4>] (dev_watchdog+0x15c/0x24c)

Oct  3 12:05:21 (none) user.warn kernel: [<c022a1e4>] (dev_watchdog+0x15c/0x24c) from [<c00281b8>] (run_timer_softirq+0x1d0/0x2dc)

Oct  3 12:05:21 (none) user.warn kernel: [<c00281b8>] (run_timer_softirq+0x1d0/0x2dc) from [<c0021cfc>] (__do_softirq+0xd8/0x1c0)

Oct  3 12:05:21 (none) user.warn kernel: [<c0021cfc>] (__do_softirq+0xd8/0x1c0) from [<c002219c>] (irq_exit+0x50/0x5c)

Oct  3 12:05:21 (none) user.warn kernel: [<c002219c>] (irq_exit+0x50/0x5c) from [<c000f750>] (handle_IRQ+0x84/0xa4)

Oct  3 12:05:21 (none) user.warn kernel: [<c000f750>] (handle_IRQ+0x84/0xa4) from [<c00086b8>] (asm_do_IRQ+0x18/0x1c)

Oct  3 12:05:21 (none) user.warn kernel: [<c00086b8>] (asm_do_IRQ+0x18/0x1c) from [<c000e55c>] (__irq_usr+0x3c/0x80)

Oct  3 12:05:21 (none) user.warn kernel: Exception stack(0xd5e5bfb0 to 0xd5e5bff8)

Oct  3 12:05:21 (none) user.warn kernel: bfa0:                                     001cc5f8 80000163 00000008 4390de30

Oct  3 12:05:21 (none) user.warn kernel: bfc0: 43aa46c0 00271970 41a2e8b0 b60fe65c 3bf37a15 43a7d83c 00000000 b60fe09c

Oct  3 12:05:21 (none) user.warn kernel: bfe0: 43946d98 b60fe088 41e66154 4390de30 20000010 ffffffff

Oct  3 12:05:21 (none) user.warn kernel: ---[ end trace 3867a107f846c95a ]---

Oct  3 12:05:21 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:21 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:21 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:30 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:31 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:33 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:39 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:40 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:53 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:55 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:05:59 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:00 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:04 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:05 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:06 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:11 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:13 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:17 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:19 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:23 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:24 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:29 (none) user.warn kernel: MCMC: error status (0xda) - Unexpected failure. (Inter MC link message(0x17))

Oct  3 12:06:42 (none) user.warn kernel: MCMC: error status (0x5f) - Message timed out. (Inter MC link message(0x17))

Oct  3 12:06:53 (none) user.warn kernel: MCMC: error status (0x5f) - Message timed out. (Inter MC link message(0x17))

Oct  3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:06:53 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:06:54 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:06:59 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:07:00 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

[zeroecko]

Oct  3 12:07:05 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

THIS GOES ON FOREVER!!!

Oct  3 12:26:39 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:26:40 (none) user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Jan  1 00:00:33 192 syslog.info syslogd started: BusyBox v1.19.3-GPM105P01-01-os-svn3104

Jan  1 00:00:33 192 user.notice kernel: klogd started: BusyBox v1.19.3-GPM105P01-01-os-svn3104 (2014-04-11 20:02:11 MDT)

Jan  1 00:00:33 192 user.info kernel:  Bulk Command S 0x43425355 T 0x5 L 8 F 128 Trg 0 LUN 0 CL 10

Jan  1 00:00:33 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Jan  1 00:00:33 192 user.debug kernel: usb-storage: -- transfer complete

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Jan  1 00:00:33 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Status code 0; transferred 8/8

Jan  1 00:00:33 192 user.debug kernel: usb-storage: -- transfer complete

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Attempting to get CSW...

Jan  1 00:00:33 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Jan  1 00:00:33 192 user.debug kernel: usb-storage: -- transfer complete

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Bulk status result = 0

Jan  1 00:00:33 192 user.notice root: init: System logging initiated

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0

Jan  1 00:00:33 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Jan  1 00:00:33 192 user.debug kernel: usb-storage: *** thread sleeping.

Jan  1 00:00:33 192 user.debug kernel: usb-storage: queuecommand_lck called

Jan  1 00:00:33 192 user.notice kernel: sd 0:0:0:0: [sda] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)

Jan  1 00:00:33 192 user.debug kernel: usb-storage: *** thread awakened.

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Bad target number (3:0)

Jan  1 00:00:33 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000

Jan  1 00:00:33 192 user.debug kernel: usb-storage: *** thread sleeping.

Jan  1 00:00:33 192 user.debug kernel: usb-storage: queuecommand_lck called

Jan  1 00:00:33 192 user.debug kernel: usb-storage: *** thread awakened.

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)

Jan  1 00:00:33 192 user.debug kernel: usb-storage:  1a 00 3f 00 c0 00

Jan  1 00:00:33 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x6 L 192 F 128 Trg 0 LUN 0 CL 6

Jan  1 00:00:34 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Jan  1 00:00:34 192 user.debug kernel: usb-storage: -- transfer complete

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Jan  1 00:00:34 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192

Jan  1 00:00:34 192 user.debug kernel: usb-storage: -- short read transfer

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Attempting to get CSW...

Jan  1 00:00:34 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Jan  1 00:00:34 192 user.debug kernel: usb-storage: -- transfer complete

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Bulk status result = 0

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0

Jan  1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.

Jan  1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.

Jan  1 00:00:34 192 user.notice root: init: Crond started

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Bad target number (4:0)

Jan  1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.

Jan  1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Bad target number (5:0)

Jan  1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.

Jan  1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Bad target number (6:0)

Jan  1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.

Jan  1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Bad target number (7:0)

Jan  1 00:00:34 192 user.debug kernel: usb-storage: scsi cmd done, result=0x40000

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread sleeping.

Jan  1 00:00:34 192 user.debug kernel: usb-storage 1-1:1.0: scan complete

Jan  1 00:00:34 192 user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off

Jan  1 00:00:34 192 user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00

Jan  1 00:00:34 192 user.debug kernel: usb-storage: queuecommand_lck called

Jan  1 00:00:34 192 user.debug kernel: usb-storage: *** thread awakened.

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)

Jan  1 00:00:34 192 user.debug kernel: usb-storage:  1a 00 3f 00 c0 00

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x7 L 192 F 128 Trg 0 LUN 0 CL 6

Jan  1 00:00:34 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Jan  1 00:00:34 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Jan  1 00:00:34 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer

[zeroecko]

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] No Caching mode page present

Oct  3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.notice root: init: read system time from file

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  00 00 00 00 00 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  1e 00 00 00 01 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x9 L 0 F 0 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x1

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transport indicates command failure

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Issuing auto-REQUEST_SENSE

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xa L 18 F 128 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 18/18

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- Result from auto-sense is 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: (Unknown Key): (unknown ASC/ASCQ)

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x2

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  00 00 00 00 00 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xb L 0 F 0 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command READ_CAPACITY (10 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  25 00 00 00 00 00 00 00 00 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xc L 8 F 128 Trg 0 LUN 0 CL 10

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 8/8

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  1a 00 3f 00 c0 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xd L 192 F 128 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.notice root: hotplug net

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)

Oct  3 12:26:00 192 user.notice root: hotplug module

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  1a 00 3f 00 c0 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xe L 192 F 128 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.notice root: hotplug queues

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries

Oct  3 12:26:00 192 user.notice root: hotplug queues

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192

Oct  3 12:26:00 192 user.notice root: hotplug net

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] No Caching mode page present

Oct  3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command READ_10 (10 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  28 00 00 00 00 00 00 00 08 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0xf L 4096 F 128 Trg 0 LUN 0 CL 10

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

[zeroecko]

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 4096/4096

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.info kernel:  sda: sda1

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  00 00 00 00 00 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x10 L 0 F 0 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  00 00 00 00 00 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x11 L 0 F 0 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command READ_CAPACITY (10 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  25 00 00 00 00 00 00 00 00 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x12 L 8 F 128 Trg 0 LUN 0 CL 10

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 8/8

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  1a 00 3f 00 c0 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x13 L 192 F 128 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: queuecommand_lck called

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread awakened.

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Command MODE_SENSE (6 bytes)

Oct  3 12:26:00 192 user.debug kernel: usb-storage:  1a 00 3f 00 c0 00

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Command S 0x43425355 T 0x14 L 192 F 128 Trg 0 LUN 0 CL 6

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 31/31

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk command transfer result=0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code -121; transferred 36/192

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- short read transfer

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk data transfer result 0x1

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Attempting to get CSW...

Oct  3 12:26:00 192 user.debug kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Status code 0; transferred 13/13

Oct  3 12:26:00 192 user.debug kernel: usb-storage: -- transfer complete

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk status result = 0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: scsi cmd done, result=0x0

Oct  3 12:26:00 192 user.debug kernel: usb-storage: *** thread sleeping.

Oct  3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] No Caching mode page present

Oct  3 12:26:00 192 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through

Oct  3 12:26:00 192 user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk

Oct  3 12:26:00 192 user.warn kernel: MCMC Link: Initialization started.

Oct  3 12:26:00 192 user.warn kernel: mcmc_init_payloads called

Oct  3 12:26:00 192 user.warn kernel: mcmc_init_payloads done

Oct  3 12:26:00 192 user.warn kernel: MCMC: mac address a:d3:75:50:8a:8a

Oct  3 12:26:00 192 user.info kernel: mcmc_init called.

Oct  3 12:26:00 192 user.warn kernel: MCMC: starting mcmc_recv thread.

Oct  3 12:26:00 192 user.warn kernel: MCMC Link: Initialization successful. (slot = 0 mcmc_debug = 0x0)

Oct  3 12:26:02 192 user.notice root: init: initialize mcmc link

Oct  3 12:26:02 192 user.warn kernel: mcmc_open called

Oct  3 12:26:02 192 user.warn kernel: mcmc_open done

Oct  3 12:26:02 192 user.notice root: init: Starting base services

Oct  3 12:26:03 192 user.notice root: init: portmap and rpcd starting

Oct  3 12:26:03 192 user.notice root: init: pfud starting

Oct  3 12:26:03 192 user.notice root: init: watcherd starting

Oct  3 12:26:03 192 user.notice root: init: getting/setting system clock (NTP or CAPI)

Oct  3 12:26:03 192 user.notice root: systime.srv: CAPI time management configured

Oct  3 12:26:04 192 user.info kernel: watchdog: timeout set to 900 seconds

Oct  3 12:26:04 192 user.info kernel: watchdog: keepalive string changed to: 1915

Oct  3 12:26:04 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:26:05 192 user.warn kernel: ------------[ cut here ]------------

Oct  3 12:26:05 192 user.warn kernel: WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0x15c/0x24c()

Oct  3 12:26:05 192 user.info kernel: NETDEV WATCHDOG: mcmc (): transmit queue 0 timed out

Oct  3 12:26:05 192 user.warn kernel: Modules linked in: mcmclink g_serial ocores_udc mcfulink mooseproc mcscbridge msgdrv

Oct  3 12:26:05 192 user.warn kernel: [<c0014428>] (unwind_backtrace+0x0/0xec) from [<c02a6c50>] (dump_stack+0x20/0x24)

Oct  3 12:26:05 192 user.warn kernel: [<c02a6c50>] (dump_stack+0x20/0x24) from [<c001bf60>] (warn_slowpath_common+0x5c/0x74)

Oct  3 12:26:05 192 user.warn kernel: [<c001bf60>] (warn_slowpath_common+0x5c/0x74) from [<c001c034>] (warn_slowpath_fmt+0x40/0x48)

Oct  3 12:26:05 192 user.warn kernel: [<c001c034>] (warn_slowpath_fmt+0x40/0x48) from [<c022a1e4>] (dev_watchdog+0x15c/0x24c)

Oct  3 12:26:05 192 user.warn kernel: [<c022a1e4>] (dev_watchdog+0x15c/0x24c) from [<c00281b8>] (run_timer_softirq+0x1d0/0x2dc)

Oct  3 12:26:05 192 user.warn kernel: [<c00281b8>] (run_timer_softirq+0x1d0/0x2dc) from [<c0021cfc>] (__do_softirq+0xd8/0x1c0)

Oct  3 12:26:05 192 user.warn kernel: [<c0021cfc>] (__do_softirq+0xd8/0x1c0) from [<c002219c>] (irq_exit+0x50/0x5c)

Oct  3 12:26:05 192 user.warn kernel: [<c002219c>] (irq_exit+0x50/0x5c) from [<c000f750>] (handle_IRQ+0x84/0xa4)

Oct  3 12:26:05 192 user.warn kernel: [<c000f750>] (handle_IRQ+0x84/0xa4) from [<c00086b8>] (asm_do_IRQ+0x18/0x1c)

Oct  3 12:26:05 192 user.warn kernel: [<c00086b8>] (asm_do_IRQ+0x18/0x1c) from [<c000e394>] (__irq_svc+0x34/0x80)

Oct  3 12:26:05 192 user.warn kernel: Exception stack(0xc03e7f50 to 0xc03e7f98)

Oct  3 12:26:05 192 user.warn kernel: 7f40:                                     00000000 0005317f 0005217f 60000013

Oct  3 12:26:05 192 user.warn kernel: 7f60: c03e86c8 00000000 c07400e0 c03eb1fc 49804000 41069265 49bd4dc4 c03e7fa4

Oct  3 12:26:05 192 user.warn kernel: 7f80: 600000d3 c03e7f98 c000f8ec c000f8f8 60000013 ffffffff

Oct  3 12:26:05 192 user.warn kernel: [<c000e394>] (__irq_svc+0x34/0x80) from [<c000f8f8>] (default_idle+0x3c/0x40)

Oct  3 12:26:05 192 user.warn kernel: [<c000f8f8>] (default_idle+0x3c/0x40) from [<c000fad0>] (cpu_idle+0x60/0xb4)

Oct  3 12:26:05 192 user.warn kernel: [<c000fad0>] (cpu_idle+0x60/0xb4) from [<c02a42c4>] (rest_init+0x68/0x80)

Oct  3 12:26:05 192 user.warn kernel: [<c02a42c4>] (rest_init+0x68/0x80) from [<c03be7a0>] (start_kernel+0x2a8/0x300)

Oct  3 12:26:05 192 user.warn kernel: ---[ end trace a23a7dd6032bcd40 ]---

Oct  3 12:26:05 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:26:06 192 user.info kernel: eth0: link up (1000/Full)

Oct  3 12:26:07 192 user.notice root: init: Calling next rcS script

Oct  3 12:26:07 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:26:07 192 daemon.info init: starting pid 1987, tty '': '/sbin/getty -L ttyGS0 9600 vt100'

Oct  3 12:26:07 192 user.debug kernel: gs_open: ttyGS0 (c1c61c00,d6e83e80)

Oct  3 12:26:09 192 user.notice root: Starting logc

Oct  3 12:26:10 192 user.notice root: Starting appsv

Oct  3 12:26:24 192 user.notice root: hotplug queues

Oct  3 12:26:24 192 user.notice root: hotplug net

Oct  3 12:26:25 192 user.notice root: Starting web

Oct  3 12:26:26 192 user.notice root: hotplug net

Oct  3 12:26:26 192 user.notice root: hotplug queues

Oct  3 12:26:32 192 user.notice root: Starting slpd

Oct  3 12:26:33 192 user.notice root: Starting sfcbd

Oct  3 12:26:35 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:26:35 192 user.notice root: Starting snmpd

Oct  3 12:26:43 192 ftp.err pure-ftpd: (?@?) [ERROR] Unable to start a standalone server: [Address already in use]

Oct  3 12:26:50 192 user.notice root: systime.srv: Stopping NTP client if running

Oct  3 12:26:56 192 auth.info sshd[2421]: Server listening on 0.0.0.0 port 22.

Oct  3 12:27:05 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:27:35 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:27:49 192 user.notice root: hotplug queues

Oct  3 12:27:49 192 user.notice root: hotplug net

Oct  3 12:27:51 192 user.notice root: hotplug net

Oct  3 12:27:51 192 user.notice root: hotplug queues

Oct  3 12:28:05 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:28:07 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:28:09 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:28:11 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:28:13 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:28:17 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:28:18 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:28:23 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:28:24 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Oct  3 12:28:29 192 user.warn kernel: MCMC: error status (0xdc) - Memory write failed. (Inter MC link message(0x17))

Jan  1 00:00:33 192 syslog.info syslogd started: BusyBox v1.19.3-GPM105P01-01-os-svn3104

Jan  1 00:00:33 192 user.notice kernel:     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)

Jan  1 00:00:33 192 user.notice kernel:     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)

Jan  1 00:00:33 192 user.notice kernel:     modules : 0xbf000000 - 0xc0000000   (  16 MB)

Jan  1 00:00:33 192 user.notice kernel:       .text : 0xc0008000 - 0xc03bd9f0   (3799 kB)

Jan  1 00:00:33 192 user.notice kernel:       .init : 0xc03be000 - 0xc03e6000   ( 160 kB)

Jan  1 00:00:33 192 user.notice kernel:       .data : 0xc03e6000 - 0xc0408440   ( 138 kB)

Jan  1 00:00:33 192 user.notice kernel:        .bss : 0xc0408464 - 0xc043ee3c   ( 219 kB)

Jan  1 00:00:33 192 user.info kernel: SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

Jan  1 00:00:33 192 user.info kernel: NR_IRQS:32

Jan  1 00:00:33 192 user.info kernel: sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms

Jan  1 00:00:33 192 user.info kernel: Console: colour dummy device 80x30

Jan  1 00:00:33 192 user.info kernel: Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)

Jan  1 00:00:33 192 user.info kernel: pid_max: default: 32768 minimum: 301

Jan  1 00:00:33 192 user.info kernel: Mount-cache hash table entries: 512

Jan  1 00:00:33 192 user.notice root: init: System logging initiated

Jan  1 00:00:33 192 user.info kernel: CPU: Testing write buffer coherency: ok

Jan  1 00:00:33 192 user.info kernel: ftrace: allocating 11785 entries in 35 pages

Jan  1 00:00:33 192 user.info kernel: Setting up static identity map for 0x49aabb28 - 0x49aabb64

Jan  1 00:00:33 192 user.info kernel: NET: Registered protocol family 16

Jan  1 00:00:33 192 user.info kernel: L210 cache controller enabled

Jan  1 00:00:33 192 user.info kernel: l2x0: 8 ways, CACHE_ID 0x4100544f, AUX_CTRL 0x00350249, Cache size: 262144 B

Jan  1 00:00:33 192 user.warn kernel: IRQR_ARM0_IRQ_ENA=0x80000000

Jan  1 00:00:33 192 user.warn kernel: IRQR_ARM0_SERIAL_IRQ_ENA=0x11

Jan  1 00:00:33 192 user.warn kernel: SPI_CTRL_PTR=0x408

Jan  1 00:00:33 192 user.warn kernel: dhs_udc_init:

Jan  1 00:00:33 192 user.info kernel: bio: create slab <bio-0> at 0

Jan  1 00:00:33 192 user.notice kernel: SCSI subsystem initialized

Jan  1 00:00:33 192 user.info kernel: usbcore: registered new interface driver usbfs

Jan  1 00:00:33 192 user.info kernel: usbcore: registered new interface driver hub

[zeroecko]

Jan  1 00:00:33 192 user.info kernel: usbcore: registered new device driver usb

Jan  1 00:00:33 192 user.info kernel: Switching to clocksource moose_clksrc

Jan  1 00:00:33 192 user.info kernel: NET: Registered protocol family 2

Jan  1 00:00:33 192 user.info kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

Jan  1 00:00:33 192 user.info kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes)

Jan  1 00:00:33 192 user.info kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

Jan  1 00:00:33 192 user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)

Jan  1 00:00:33 192 user.info kernel: TCP reno registered

Jan  1 00:00:33 192 user.info kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)

Jan  1 00:00:33 192 user.info kernel: UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

Jan  1 00:00:33 192 user.info kernel: NET: Registered protocol family 1

Jan  1 00:00:33 192 user.info kernel: RPC: Registered named UNIX socket transport module.

Jan  1 00:00:33 192 user.notice root: init: Crond started

Jan  1 00:00:33 192 user.info kernel: RPC: Registered udp transport module.

Jan  1 00:00:33 192 user.info kernel: RPC: Registered tcp transport module.

Jan  1 00:00:33 192 user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.

Jan  1 00:00:33 192 user.info kernel: Trying to unpack rootfs image as initramfs...

Jan  1 00:00:33 192 user.info kernel: Freeing initrd memory: 4608K

Jan  1 00:00:33 192 user.warn kernel: NetWinder Floating Point Emulator V0.97 (double precision)

Jan  1 00:00:33 192 user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher

Jan  1 00:00:33 192 user.info kernel: JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

Jan  1 00:00:33 192 user.info kernel: msgmni has been set to 752

Jan  1 00:00:33 192 user.info kernel: io scheduler noop registered (default)

Jan  1 00:00:33 192 user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

Jan  1 00:00:33 192 user.info kernel: serial8250.0: ttyS0 at MMIO 0xffff0000 (irq = 3) is a 16550A

Jan  1 00:00:33 192 user.info kernel: console [ttyS0] enabled

Jan  1 00:00:33 192 user.info kernel: serial8250.0: ttyS1 at MMIO 0xfff88800 (irq = 31) is a 16550A

Jan  1 00:00:33 192 user.info kernel: brd: module loaded

Jan  1 00:00:33 192 user.notice kernel: Moose flash device: 0x3fe0000 bytes at physical location 0xf8000000

Jan  1 00:00:33 192 user.info kernel: Moose Flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x008965

Jan  1 00:00:33 192 user.warn kernel: NOR chip too large to fit in mapping. Attempting to cope...

Jan  1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A

Jan  1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A

Jan  1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A

Jan  1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A

Jan  1 00:00:33 192 user.info kernel: Intel/Sharp Extended Query Table at 0x010A

Jan  1 00:00:33 192 user.info kernel: Using buffer write method

Jan  1 00:00:33 192 user.info kernel: Using auto-unlock on power-up/resume

Jan  1 00:00:33 192 user.notice kernel: cfi_cmdset_0001: Erase suspend on write enabled

Jan  1 00:00:33 192 user.debug kernel: erase region 0: offset=0x0,size=0x8000,blocks=4

Jan  1 00:00:33 192 user.debug kernel: erase region 1: offset=0x20000,size=0x20000,blocks=511

Jan  1 00:00:33 192 user.warn kernel: Reducing visibility of 65536KiB chip to 65408KiB

Jan  1 00:00:33 192 user.notice kernel: Creating 9 MTD partitions on "Moose Flash":

Jan  1 00:00:33 192 user.notice kernel: 0x000000018000-0x000000020000 : "mc boot meta"

Jan  1 00:00:33 192 user.notice kernel: 0x000000020000-0x000000220000 : "loader"

Jan  1 00:00:33 192 user.notice kernel: 0x000000000000-0x000000008000 : "loader meta"

Jan  1 00:00:33 192 user.notice kernel: 0x000000008000-0x000000018000 : "spare meta"

Jan  1 00:00:33 192 user.notice kernel: 0x000000c00000-0x000003900000 : "app"

Jan  1 00:00:33 192 user.notice kernel: 0x000000220000-0x000000c00000 : "log"

Jan  1 00:00:33 192 user.notice kernel: 0x000003900000-0x000003fe0000 : "cfg"

Jan  1 00:00:33 192 user.notice kernel: 0x000000000000-0x000003fe0000 : "all"

Jan  1 00:00:33 192 user.notice kernel: 0x000000220000-0x000003fe0000 : "kialc"

Jan  1 00:00:33 192 user.info kernel: m25p80 spi0.0: w25q128 (16384 Kbytes)

Jan  1 00:00:33 192 user.notice kernel: 3 cmdlinepart partitions found on MTD device spi0.0

Oct  3 12:28:00 192 user.notice kernel: Creating 3 MTD partitions on "spi0.0":

Oct  3 12:28:00 192 user.notice kernel: 0x000000000000-0x000000600000 : "bootloader"

Oct  3 12:28:00 192 user.notice kernel: 0x000000600000-0x000000900000 : "kernel"

Oct  3 12:28:00 192 user.notice kernel: 0x000000900000-0x000001000000 : "initramfs"

Oct  3 12:28:00 192 user.info kernel: f_mac3h_gmii_bus: probed

Oct  3 12:28:00 192 user.info kernel: eth0: Fujitsu MAC3H at 0xfffa0000 irq 5 (00:c0:ff:19:e9:c0)

Oct  3 12:28:00 192 user.info kernel: eth0: attached PHY driver [ET1011C] (gmii_bus:phy_addr=mac3h-ffffffff:10, irq=-1)

Oct  3 12:28:00 192 user.info kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).

Oct  3 12:28:00 192 user.info kernel: CSLIP: code copyright 1989 Regents of the University of California.

Oct  3 12:28:00 192 user.info kernel: SLIP linefill/keepalive option.

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, 19 Sep 2007

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, starting ohs900h_probe

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, ioremap addr->start = 0xFFFF7000, resource_len(addr) = 0x100

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, setting addr_reg to ioremap_nocache(addr->start = 0xFFFF7000) == 0xFEFF7000

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, allocating memory

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, spin_lock_init

Oct  3 12:28:00 192 user.notice root: init: read system time from file

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, ohs900->addr_reg = 0xfeff7000, OHS900_HWREVREG = 0xe1

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, started port_power, usb hw version = 32

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, setting ohs900->ctrl1

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, disabling interrupts

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, clearing interrupt status

Oct  3 12:28:00 192 user.info kernel: ohs900: ohs900->board: c03fe86c, ohs900->board->port_power: c01e9670

Oct  3 12:28:00 192 user.warn kernel: power off

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, inside stubbed sm3k_port_power

Oct  3 12:28:00 192 user.info kernel: ohs900: Resetting core: 0

Oct  3 12:28:00 192 user.info kernel: ohs900: port_power: 0

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, OHS900_IRQ_ENABLE = 0

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, returned from port_power

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, returned from spin_unlock_irqrestore

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, getting hw version

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, hw version = 32

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, speed: 10

Oct  3 12:28:00 192 user.info kernel: ohs900-hcd ohs900-hcd: OHS900 v2.0

Oct  3 12:28:00 192 user.info kernel: ohs900-hcd ohs900-hcd: new USB bus registered, assigned bus number 1

Oct  3 12:28:00 192 user.info kernel: ohs900-hcd ohs900-hcd: irq 7, io base 0xffff7000

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, ohs900->addr_reg = 0xfeff7000, OHS900_HWREVREG = 0xe1

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, started port_power, usb hw version = 32

Oct  3 12:28:00 192 user.warn kernel: port_power: 0

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, setting ohs900->ctrl1

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, disabling interrupts

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, clearing interrupt status

Oct  3 12:28:00 192 user.info kernel: ohs900: ohs900->board: c03fe86c, ohs900->board->port_power: c01e9670

Oct  3 12:28:00 192 user.warn kernel: power on

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, inside stubbed sm3k_port_power

Oct  3 12:28:00 192 user.info kernel: ohs900: Resetting core: 0

Oct  3 12:28:00 192 user.info kernel: ohs900: port_power: 1

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, OHS900_IRQ_ENABLE = 4

Oct  3 12:28:00 192 user.debug kernel: usb usb1: default language 0x0409

Oct  3 12:28:00 192 user.debug kernel: usb usb1: udev 1, busnum 1, minor = 0

Oct  3 12:28:00 192 user.info kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

Oct  3 12:28:00 192 user.info kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Oct  3 12:28:00 192 user.info kernel: usb usb1: Product: OHS900 v2.0

Oct  3 12:28:00 192 user.info kernel: usb usb1: Manufacturer: Linux 3.3.6-GPM105P01-01-os-svn3084 ohs900-hcd

Oct  3 12:28:00 192 user.info kernel: usb usb1: SerialNumber: ohs900-hcd

Oct  3 12:28:00 192 user.debug kernel: usb usb1: usb_probe_device

Oct  3 12:28:00 192 user.debug kernel: usb usb1: configuration #1 chosen from 1 choice

Oct  3 12:28:00 192 user.debug kernel: usb usb1: adding 1-0:1.0 (config #1, interface 0)

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: usb_probe_interface

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: usb_probe_interface - got id

Oct  3 12:28:00 192 user.info kernel: hub 1-0:1.0: USB hub found

Oct  3 12:28:00 192 user.info kernel: hub 1-0:1.0: 1 port detected

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: standalone hub

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: individual port power switching

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: no over-current protection

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: power on to power good time: 20ms

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: local power source is good

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: enabling power on all ports

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, ohs900->addr_reg = 0xfeff7000, OHS900_HWREVREG = 0xe1

Oct  3 12:28:00 192 user.info kernel: ohs900: driver ohs900-hcd, started port_power, usb hw version = 32

Oct  3 12:28:00 192 user.warn kernel: port_power: 10101

Oct  3 12:28:00 192 user.info kernel: ohs900: OHS900 v2.0, irq 7

Oct  3 12:28:00 192 user.info kernel: Initializing USB Mass Storage driver...

Oct  3 12:28:00 192 user.info kernel: usbcore: registered new interface driver usb-storage

Oct  3 12:28:00 192 user.info kernel: USB Mass Storage support registered.

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00010101, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: port 1: status 0101 change 0001

Oct  3 12:28:00 192 user.info kernel: usbcore: registered new interface driver libusual

Oct  3 12:28:00 192 user.info kernel: mousedev: PS/2 mouse device common for all mice

Oct  3 12:28:00 192 user.info kernel: i2c /dev entries driver

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00000101, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s

Oct  3 12:28:00 192 user.info kernel: usbcore: registered new interface driver usbhid

Oct  3 12:28:00 192 user.info kernel: usbhid: USB HID core driver

Oct  3 12:28:00 192 user.info kernel: TCP cubic registered

Oct  3 12:28:00 192 user.info kernel: NET: Registered protocol family 17

Oct  3 12:28:00 192 user.notice kernel: Registering the dns_resolver key type

Oct  3 12:28:00 192 user.debug kernel: ohs900: end reset

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.info kernel: usb 1-1: new full-speed USB device number 2 using ohs900-hcd

Oct  3 12:28:00 192 user.info kernel: Freeing init memory: 160K

Oct  3 12:28:00 192 user.debug kernel: ohs900: end reset

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.err kernel: usb 1-1: device descriptor read/64, error -62

Oct  3 12:28:00 192 user.debug kernel: ohs900: end reset

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.err kernel: usb 1-1: device descriptor read/64, error -62

Oct  3 12:28:00 192 user.debug kernel: ohs900: end reset

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.info kernel: usb 1-1: new full-speed USB device number 3 using ohs900-hcd

Oct  3 12:28:00 192 user.info kernel: Installing mailbox message driver

Oct  3 12:28:00 192 user.info kernel: Mailbox message driver version 1.00.2014-04-11.20:01 installed.

Oct  3 12:28:00 192 user.debug kernel: ohs900: end reset

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.info kernel: Installing Bridge Driver

Oct  3 12:28:00 192 user.info kernel: Bridge: Initializing Pipes.

Oct  3 12:28:00 192 user.info kernel: Bridge: Init CAPI0 pipe, op 1, minor 0, size 524288, shmem phys = 41061000

Oct  3 12:28:00 192 user.info kernel: Bridge: Init tMUI pipe, op 2, minor 4, size 10240, shmem phys = 41127800

Oct  3 12:28:00 192 user.info kernel: Bridge: Init COM1 pipe, op 11, minor 1, size 131072, shmem phys = 410e2000

Oct  3 12:28:00 192 user.info kernel: Bridge: Init COM2 pipe, op 12, minor 2, size 131072, shmem phys = 410e5800

Oct  3 12:28:00 192 user.info kernel: Bridge: Init COM3 pipe, op 13, minor 3, size 131072, shmem phys = 41106800

Oct  3 12:28:00 192 user.info kernel: Bridge: Init COM4 pipe, op 14, minor 5, size 131072, shmem phys = 41148800

Oct  3 12:28:00 192 user.info kernel: Bridge: Init CAPI6 pipe, op 3, minor 6, size 524288, shmem phys = 41169800

Oct  3 12:28:00 192 user.info kernel: Bridge: Init CAPI7 pipe, op 4, minor 7, size 524288, shmem phys = 411ea800

Oct  3 12:28:00 192 user.info kernel: Bridge: Init CAPI8 pipe, op 5, minor 8, size 524288, shmem phys = 4126b800

Oct  3 12:28:00 192 user.info kernel: Bridge: Init CAPI9 pipe, op 6, minor 9, size 524288, shmem phys = 412ec800

Oct  3 12:28:00 192 user.info kernel: Bridge Driver Version G03.2014-04-11.20:01 Installed at Major 150

Oct  3 12:28:00 192 user.err kernel: usb 1-1: device descriptor read/64, error -62

Oct  3 12:28:00 192 user.info kernel: starting moose_watchdog thread.

Oct  3 12:28:00 192 user.notice root: hotplug module

Oct  3 12:28:00 192 user.info kernel: moose watchdog enabled. timeout = 42 sec.

Oct  3 12:28:00 192 user.info kernel: Bridge installation complete

Oct  3 12:28:00 192 user.info kernel: mooseproc loaded. version: G01.2014-04-11.20:01

Oct  3 12:28:00 192 user.warn kernel: mcfu link: Initialization started, driver version 3.00.2014-04-11.20:01.

Oct  3 12:28:00 192 user.warn kernel: mcfu link: Initialization successful.

Oct  3 12:28:00 192 user.debug kernel: ohs900: end reset

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.notice root: hotplug net

Oct  3 12:28:00 192 user.debug kernel: eng:udc: no VBUS detection, assuming always-on

Oct  3 12:28:00 192 user.info kernel: udc: ocores-udc version 1.0

Oct  3 12:28:00 192 user.err kernel: usb 1-1: device descriptor read/64, error -62

Oct  3 12:28:00 192 user.debug kernel: udc ocores-udc.0: registering UDC driver [g_serial]

Oct  3 12:28:00 192 user.debug kernel: gserial_setup: registered 1 ttyGS* device

Oct  3 12:28:00 192 user.debug kernel: g_serial gadget: adding config #2 'CDC ACM config'/bf035c98

Oct  3 12:28:00 192 user.debug kernel: g_serial gadget: adding 'acm'/d6ba1840 to config 'CDC ACM config'/bf035c98

Oct  3 12:28:00 192 user.debug kernel: g_serial gadget: acm ttyGS0: dual speed IN/ep1 OUT/ep2 NOTIFY/ep3

Oct  3 12:28:00 192 user.notice root: hotplug queues

Oct  3 12:28:00 192 user.debug kernel: g_serial gadget: cfg 2/bf035c98 speeds: high full

Oct  3 12:28:00 192 user.debug kernel: g_serial gadget:   interface 0 = acm/d6ba1840

Oct  3 12:28:00 192 user.debug kernel: g_serial gadget:   interface 1 = acm/d6ba1840

Oct  3 12:28:00 192 user.info kernel: g_serial gadget: Gadget Serial v2.4

Oct  3 12:28:00 192 user.info kernel: g_serial gadget: g_serial ready

Oct  3 12:28:00 192 user.debug kernel: ohs900: end reset

Oct  3 12:28:00 192 user.notice root: hotplug queues

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.notice root: hotplug net

Oct  3 12:28:00 192 user.info kernel: usb 1-1: new full-speed USB device number 4 using ohs900-hcd

Oct  3 12:28:00 192 user.err kernel: usb 1-1: device not accepting address 4, error -62

Oct  3 12:28:00 192 user.debug kernel: ohs900: end reset

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00100103, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.info kernel: usb 1-1: new full-speed USB device number 5 using ohs900-hcd

Oct  3 12:28:00 192 user.err kernel: usb 1-1: device not accepting address 5, error -62

Oct  3 12:28:00 192 user.err kernel: hub 1-0:1.0: unable to enumerate USB device on port 1

Oct  3 12:28:00 192 user.debug kernel: hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002

Oct  3 12:28:00 192 user.debug kernel: ohs900: GetPortStatus 00000100, wIndex: 1, wLength: 4

Oct  3 12:28:00 192 user.warn kernel: MCMC Link: Initialization started.

Oct  3 12:28:00 192 user.warn kernel: mcmc_init_payloads called

Oct  3 12:28:00 192 user.warn kernel: mcmc_init_payloads done

Oct  3 12:28:00 192 user.warn kernel: MCMC: mac address f6:8d:19:be:7e:6d

Oct  3 12:28:00 192 user.info kernel: mcmc_init called.

Oct  3 12:28:00 192 user.warn kernel: MCMC: starting mcmc_recv thread.

Oct  3 12:28:00 192 user.warn kernel: MCMC Link: Initialization successful. (slot = 0 mcmc_debug = 0x0)

Oct  3 12:28:02 192 user.notice root: init: initialize mcmc link

Oct  3 12:28:02 192 user.warn kernel: mcmc_open called

Oct  3 12:28:02 192 user.warn kernel: mcmc_open done

Oct  3 12:28:02 192 user.notice root: init: Starting base services

Oct  3 12:28:03 192 user.notice root: init: portmap and rpcd starting

Oct  3 12:28:03 192 user.notice root: init: pfud starting

Oct  3 12:28:03 192 user.notice root: init: watcherd starting

Oct  3 12:28:03 192 user.notice root: init: getting/setting system clock (NTP or CAPI)

Oct  3 12:28:03 192 user.notice root: systime.srv: CAPI time management configured

Oct  3 12:28:04 192 user.notice root: init: Calling next rcS script

Oct  3 12:28:04 192 daemon.info init: starting pid 1961, tty '': '/sbin/getty -L ttyGS0 9600 vt100'

Oct  3 12:28:04 192 user.debug kernel: gs_open: ttyGS0 (d6add400,c1c29300)

Oct  3 12:28:04 192 user.info kernel: watchdog: timeout set to 900 seconds

Oct  3 12:28:04 192 user.info kernel: watchdog: keepalive string changed to: 1894

Oct  3 12:28:05 192 user.notice root: Starting logc

Oct  3 12:28:07 192 user.notice root: Starting appsv

Oct  3 12:28:07 192 user.info kernel: eth0: link up (1000/Full)

Oct  3 12:28:22 192 user.notice root: Starting web

Oct  3 12:28:29 192 user.notice root: Starting slpd

Oct  3 12:28:30 192 user.notice root: Starting sfcbd

Oct  3 12:28:33 192 user.notice root: Starting snmpd

Oct  3 12:28:40 192 ftp.err pure-ftpd: (?@?) [ERROR] Unable to start a standalone server: [Address already in use]

Oct  3 12:28:51 192 user.notice root: systime.srv: Stopping NTP client if running

Oct  3 12:32:49 192 auth.info sshd[2407]: Server listening on 0.0.0.0 port 22.

Oct  3 15:16:15 192 auth.info sshd[5741]: Did not receive identification string from 192.168.30.91

Oct  3 19:16:12 192 auth.info sshd[10186]: Did not receive identification string from 192.168.30.91

Oct  3 23:15:15 192 auth.info sshd[14855]: Did not receive identification string from 192.168.30.91

[HPSDMike]

Hello,

Sorry, I'm sure this isn't the answer you were hoping for but I think you need to open a support case. My guess is that you have a failed/failing controller. You are also extremely far behind on the firmware. Updating the firmware may be part of the recommneded resolution by support but you'll need to follow a specific upgrade path to get to the latest (GL220P010) since you cannot do a direct upgrade from the version you are on. 

Yes, it also appears that a certain server is trying to frequently login via SSH? Perhaps you have some sort of monitoring script installed and it's using an old password? I'd investigate on that host and see what is making the SSH call and why. 

Sorry I couldn't be more helpful.