HPE Community
MSA Storage
1752511 Members
4758 Online
108788 Solutions
New Discussion

Re: HP P2000 G3 FC DC SMB SAN Starter Kit with an FC tape library

 
Yaboto
Super Advisor

‎10-12-2012 11:43 AM - last edited on ‎04-09-2014 07:15 PM by

‎10-12-2012 11:43 AM - last edited on ‎04-09-2014 07:15 PM by

HP P2000 G3 FC DC SMB SAN Starter Kit with an FC tape library

HP P2000 G3 FC DC SMB SAN Starter Kit

 

How many embedded SAN switches and how many ports per an embedded SAN switch ?

 

How many servers in maximum can be connected to the MSA Storage ?

 

Is it possible to connect an FC tape library directly to the embedded SAN switches of the MSA storage ?

 

Is it possible to uplink a standard SAN switch to the embedded MSA SAN switch with the view of increasing attached nodes ?

 

Thanks for your help and replies !

 

Yaboto

 

 

P.S. This thread has been moevd from disk to Storage Area Networks (SAN) (Small and Medium Business). - Hp forum Moderator

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎10-12-2012 12:10 PM

‎10-12-2012 12:10 PM

Re: HP P2000 G3 FC DC SMB SAN Starter Kit with an FC tape library

The switch is external, not embedded.

 

https://h10057.www1.hp.com/ecomcat/hpcatalog/specs/provisioner/99/AP847A.htm


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.