HPE P2000 G3 STORAGE - DISK REPLACEMENT AND VDISK REBUILD AFTER HARD DRIVE FAILURE

[Androclarion]

I need to know the correct procedure if I have a full capacity hard drive bays (12 X 600Gb HDD each) on RAID 5 and one of my Hard drives health is marked as Fault/Failed and degrated.

[SUBHAJIT KHANBARMAN_1]

Procedure would be simple,

1> Replace the failed drive with new good drive with same type

2> Configure this new drive as dedicated spare or Global spare. If your system having Dynamic spare setting already configured then the moment you insert new drive Vdisk rebuild will start

3> Then you can just wait for the Vdisk reconstruction to gets completed.

Please let me know if you look for any more information.

Hope this helps!
Regards
Subhajit

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************************

[Androclarion]

Will do and I let you know... Thank you.