08-18-2015 12:29 AM
HI,
Tried to install a new HP MSA 1040 SAN Storagefor a client today. Is The First Time , never set up any.
Where can I find information on how to configure this equipment ?I will need to connect with vsphere, what settings should I do?
08-18-2015 06:11 AM
Hi
HP MSA 1040 Quick Start Instructions
http://h50146.www5.hp.com/lib/products/storage/manual/array/759126-001.pdf
HP MSA 1040 Cable Configuration Guide
http://h50146.www5.hp.com/lib/products/storage/manual/array/762786-001.pdf
HP MSA 1040 User Guide
http://h10032.www1.hp.com/ctg/Manual/c04220806
HP MSA 1040/2040 SMU Reference Guide
http://h10032.www1.hp.com/ctg/Manual/c04220794
HP MSA 1040/2040 Best practices
http://h20195.www2.hp.com/v2/getpdf.aspx/4AA4-6892ENW.pdf
Regards
08-19-2015 01:07 AM
I will have three servers with HP ESXi , then I will have to create 6 VM 's, how many volumes I create in storage and how to create ?
08-20-2015 05:54 AM
if you have enough disks create 2 disks groups each will have a different controller assigned and create a volume on the whole of the disk group.
08-21-2015 01:40 AM
And where I can see a help creating these two groups ?? I'll have to install 7 VM's , and as I have access to the VMware vSphere Storage of records?
The ESXi will call for fibre channel.
