MSA Storage
1748268 Members
3409 Online
108760 Solutions
New Discussion

How to configure msa 030

 
Antoniov.
Honored Contributor

How to configure msa 030

Hello,

I have an old msa030 and I need to reconfigure disk array.

How I can do it?

I searched for software and info but I did not find anything.

 

Thanks

Antonio Maria Vigliotti
5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: How to configure msa 030

It depends on the OS, but in most cases it is the good old ACU (array configuration utility).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Antoniov.
Honored Contributor

Re: How to configure msa 030

Thank Torsten,

I am using an old Windows 2K3;

where I can search for old version of ACU?

Antonio M.

Antonio Maria Vigliotti
Torsten.
Acclaimed Contributor

Re: How to configure msa 030

Go to hpe.com drivers section, select your server (e.g. DL380G6 or something), select WIndows 2003 and download it. Maybe you already have the hp driver bundles already installed?

 

The MSA30 is just a "dumb" disk chassis. Connected to a plain SCSI controller you see all the disks, nothing to configure. Connected to a smart array controller (call this a default) you use ACU to configure logical drives and RAIDs.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Antoniov.
Honored Contributor

Re: How to configure msa 030

My trouble is a more complex.

I have a DL380G4 running VMWARE with local smart disk array. This server is connected to an old external MSA 030.

Perhaps, I also colud use a Linux version, if running on VMWARE layer but I prefer do not change VMWARE environment.

I hope to install software on on virtual server and manage MSA 030 from it.

 

Antonio Maria Vigliotti
Torsten.
Acclaimed Contributor

Re: How to configure msa 030

AFAIR you can download an ISO to boot from and use ACU offline, or you can configure the array by pressing F8 during POST when the controller appears to get a screen like this.

 

ACU


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!