I am getting the error message MSA 2312i device and i want to configuration user manual

[mkl09]

Hi Support,

 I am getting the error message MSA 2312i device. i am unable to find the soluation.

2018-01-05 08:55:45 A9208562 217 Supercapacitor failure. Status: cell 2 voltage is too high (28), State: failure (12) (p2: 2629, p3: 0)
2018-01-05 04:55:07 A9208557 217 Supercapacitor failure. Status: cell 2 voltage is too high (28), State: failure (12) (p2: 2629, p3: 0)
2018-01-05 00:54:30 A9208552 217 Supercapacitor failure. Status: cell 2 voltage is too high (28), State: failure (12) (p2: 2629, p3: 0)
2018-01-04 20:53:52 A9208547 217 Supercapacitor failure. Status: cell 2 voltage is too high (28), State: failure (12) (p2: 2629, p3: 0)
2018-01-04 13:54:27 A9208509 217 Supercapacitor failure. Status: cell 2 voltage is too high (28), State: failure (12) (p2: 2629, p3: 0) 

[Cali]

I have seen this multiple Times with an Old Firmware.

Update the Firmware, if it dows not help, you need a Controller replace.

HPE MSA Upgrade Guide