MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Install LTO drivers on AIX

 
secondino
Occasional Visitor

Install LTO drivers on AIX

I want to use LTO connect on system AIX 5.2 , which package is necessary?
3 REPLIES 3
meloni
Honored Contributor

Re: Install LTO drivers on AIX

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpg50148

hope this can help
---------------X-------------------X--------------------X----------------X--------------
If everything is under control, you are going too slow (Mario Andretti)
secondino
Occasional Visitor

Re: Install LTO drivers on AIX

We have read the solution you post.
But we have a difference. We use a MSL6000 with 4 LTO drive . The MSL6000 work with a network storage router then the LTO is view from AIX like A FC ( fiber-channel ) device.

When we are in AIX 4.3.3 everything is ok the tape is connect via fcscsi0 port. We upgrade our AIX to 5.2 and now it doesn't work properly.

Is there anybody have the same configuration and can send to me a screen from smitty or otherwise.

Thank's in advance
david5337_1
Regular Advisor

Re: Install LTO drivers on AIX

You need to check the device maping in FC-SCSI router.
If no problem,reinstall the driver in os.
And use command to check device as "lsdev -Cc tape".
Good lucky to you!