HPE Community
MSA Storage
1752782 Members
5741 Online
108789 Solutions
New Discussion

Re: Interconnect SAS HPMSA 2000G3 with Blade System c7000

 
tomytree22
New Member

‎02-16-2015 05:33 PM - last edited on ‎02-16-2015 10:34 PM by

‎02-16-2015 05:33 PM - last edited on ‎02-16-2015 10:34 PM by

Interconnect SAS HPMSA 2000G3 with Blade System c7000

What I neeed to interconnect  SAS HPMSA 2000G3 with Blade System c7000 (4 blade servers installed HP Proliant bl640c)?

 

 

P.S. This thread has been moevd from Data Center Automation Support and News Forum to Storage Area Networks (SAN) (Small and Medium Business). - Hp Forum moderator

 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎02-17-2015 12:14 AM - edited ‎02-17-2015 12:15 AM

‎02-17-2015 12:14 AM - edited ‎02-17-2015 12:15 AM

Re: Interconnect SAS HPMSA 2000G3 with Blade System c7000

If you talk about the MSA2000 G3 (aka P2000) it depends on the kind of controllers the array has - FC or iSCSI or SAS or a combo.

 

If the P2000 is SAS (I assume), you either need SAS switches in the C7000 or you may consider to swap the P2000 controllers to use another technology like FC or iSCSI.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.