MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Is it possible to create multiples iSCSI targets on MSA1040 or MSA2050

 
Adeliuss
Occasional Visitor

Is it possible to create multiples iSCSI targets on MSA1040 or MSA2050

Hi,

Is it possible to create multiple iSCSI targets on MSA1040 or MSA2050?

We have a solution that recommands having separate tagets for our iSCSI volumes.

Regards.

2 REPLIES 2
arun_r
Frequent Advisor

Re: Is it possible to create multiples iSCSI targets on MSA1040 or MSA2050

Hi,

MSA 1040/2050 doesnt support mltiple iscsi targets.

The storage system uses Unified LUN Presentation (ULP), which can expose all LUNs through all host ports on both controllers. The interconnect information is managed in the controller firmware. ULP appears to the host as an active-active storage system where the host can choose any available path to access a LUN regardless of disk group ownership.

From SMU guide page 26:

https://support.hpe.com/hpsc/doc/public/display?docId=a00017707en_us

 

 

 

I am an HPE Employee

Accept or Kudo

arun_r
Frequent Advisor

Re: Is it possible to create multiples iSCSI targets on MSA1040 or MSA2050

Hello,

 Can you please help us to understand if the query was addressed?

This will help everyone who are all following your forum.

If you feel this was helpful please click the KUDOS! thumb below!

I am an HPE Employee

Accept or Kudo