MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MA8000 and windows 2003 SP1X86 on DL 580

 
Touron Denis
Occasional Contributor

MA8000 and windows 2003 SP1X86 on DL 580

Hi

I would like to connect a DL580 with a x86 Windows 2003 SP1 to a MA8000 with HSG 80 on VCS 8.8-2

I dont' found any compatibility matrice on Hp web site for MA8000 and windows 2003 sp1

Someone could send me the URL for the matrice or the matrice

Thanks

Best regards
Dnstouron
3 REPLIES 3
Touron Denis
Occasional Contributor

Re: MA8000 and windows 2003 SP1X86 on DL 580

no one have a matrix for HBA drivers/ switch Brocade 2800 firmware/ and hsg80 firmware for a DL580 G2 serveur on windows 2003 SP1

I can downgrade the DL580 in windows 2000 SP4 if needed


thanks for answer
Stephen Kebbell
Honored Contributor

Re: MA8000 and windows 2003 SP1X86 on DL 580

Hi,

I don't have a public link. But I have an internal HP document that says it should be supported. I am not allowed to attach it as it is HP restricted (HP and Partners only)

SW2800: Switch Firmware 2.6.2c minimum, 2.6.2d recommended

HSG80: ACS 8.8-2 is not recommended. You should upgrade to ACS 8.8-4
I assume you have SCSI-3 mode on the HSG80. Connection OS Type: WINNT

Supported HBAs:
Emulex Based HBAs (e.g. KGPSA-CB, FCA2101, FCA2404)
Driver: 5-4.82a16
Firmware for KGPSA or FCA2101: 3.92a2 and Boot-BIOS 1.70a1
For FCA2404: FW 1.01a2, Boot BIOS 1.63a1

Qlogic HBA (FCA2214): Driver 8.2.0.73, BIOS 1.33 (no Boot Support)

SecurePath Minimum Version 4.0B

Not sure about W2K3 SP1 support, it does not mention SP1. Windows 2000 SP4 is definitely supported.
Server is also supported (DL580 G2)

Regards,
Stephen
Touron Denis
Occasional Contributor

Re: MA8000 and windows 2003 SP1X86 on DL 580

Thanks a lot for your reply

this morning i've found this on the HP web site. This help me et confirme your reply

http://h18000.www1.hp.com/solutions/enterprise/highavailability/answercenter/configuration-all-list.html