MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MPIO With Windows 2003 and MSA 2012i

 
James2304
Occasional Visitor

MPIO With Windows 2003 and MSA 2012i

Hi,
I have been asked to configure an MSA 2012i dual controller array as storage for 6 Windows 2003 servers (a mixture of x86, x64, R1 and R2). Each server has 2 NICs dedicated to the iSCSI network and I have 2 procurve 140024G switches. I have been asked to configure these in an MPIO fault tolerant setup. I'm familiar with the cabling and IP configuration as have done this before with MSA 2000s and windows 2008 servers. The problem is that while W2K8 has the MPIO software as an add on feature I cannot find an equivalent in W2K3. The MSA 2000 manual is useless in explaning how I can achieve MPIO from a software point of view. I'd be really grateful if someone could point me in the right direction.

Many Thanks
1 REPLY 1
Dam Spi
Occasional Visitor

Re: MPIO With Windows 2003 and MSA 2012i

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=421495〈=pl&cc=pl&prodTypeId=18964&prodSeriesId=421492&taskId=135