MPX110 not working using for remote replication of EVA 4100

[Syedfurquan]

MPX_pr_23 and MPX_DR_25 is the one pair of MPX which is working and replication is going on that.

The other pair of MPX_pr_24 and MPX_DR_26 is the one which is showing fc link status down and not working.

I have downloaded one user guide for MPX but couldn't trace anything from there as well.

Already logged a case with HP as well and not able to get any solution from them as well even after more than 2 weeks of case logged.

[giladzzz]

Hi

You could just use one MPX110 pair for both links just to check that your problem is not else where. Just use the FC2 input and GE2 on the working MPX110 for the test then you can see if you have both connections working.

Also look at the quick start guide attached link.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01763561/c01763561.pdf

check supported configurations.

also check the settings that you need for the SAN switches.

Regards