MSA 1000- Redundant Controller Problem.

[Navaneeda Kumar]

Hi,

I have installed MSA 1000 with 2 Controllers. One controller as Redundant.

MSA 1000 is working fine with single controller. When i install the another controller it is going to the Stand by mode.When i restart my server i am not able to see the controller in ACU.
Both the controller firmware is upto date.

Also the LED 9 no is ON in one controller and other controllr 9 is off as Redundant.

Is any changes i have to do ??

Conncetivity Details.
From the server HBA card Cable goes directly MSA 1000 Single port Fibre Switch.

Any suggestions to resolve this issue.

Thanks,

[John Kufrovich]

Navaneeda,

MSA1000 only supports Active/Passive configuration. The secondary controller is only there for redundancy.

Your LED status is correct.

You will not see the other controller in ACU.

[Dean Simiana]

Navaneeda,
Do you have two Fibre HBS's in your host and two Fibre I/O or internal Fibre switches in the MSA?

The MSA Controllers have a 1-1 relationship with the Fibre I/O.
When controllers switch roles, the entire Fibre path will switch to the related I/O or switch module.

Dean.