MSA 1040 1Gbit Dual Controler - MPIO Round Robin - invalid parameter

[fr05t]

Hi,

I have a smal envoirment with

1. Two nods HP DL 380 g8 four Gigabit controler
2. Storage HP MSA 1040 2 port Gigabit dual controler

The system is windows 2012 R2 is up to date I also install all firmware updates to storage insluding drives firmware, controler firmware and NIC firmware.

I user a tutorial from http://alexappleton.net/post/44748523400/step-by-step-configuration-of-2-node-hyper-v

But in my case i used in all my nodes ethernet ports for;

1. One for Controler A
2. One for Controler B
3. One for Lan
4. One for LiveMigrationa (now is disabled)

From MPIO config i get as above

MPIO Storage Snapshot on Thursday, 23 April 2015, at 00:04:13.036

Registered DSMs: 1

================

+--------------------------------|-------------------|----|----|----|---|-----+

|DSM Name                        |      Version      |PRP | RC | RI |PVP| PVE |

|--------------------------------|-------------------|----|----|----|---|-----|

|Microsoft DSM                   |006.0003.09600.17401|0020|0003|0001|030|False|

+--------------------------------|-------------------|----|----|----|---|-----+

Microsoft DSM

=============

MPIO Disk3: 04 Paths, Round Robin with Subset, Implicit Only

        SN: 600C0FF0001DBA745928385501000000                               

        Supported Load Balance Policies: FOO RRWS LQD WP LB

From storage managment site maping look like.

Group.Host.Nickname

Volume

Access

LUN

Ports

iqn.1991-05.com.microsoft:nod1.domain.local

Quorum

read-write

0

1,2

iqn.1991-05.com.microsoft:nod1.domain.local

Storage

read-write

1

1,2

iqn.1991-05.com.microsoft:nod2.domain.local

Quorum

read-write

0

1,2

iqn.1991-05.com.microsoft:nod2.domain.local

Storage

read-write

1

1,2

It looks like Round Robin is unaivalable or the problem is storage controler MSA 1040?

[skypojames]

Did you ever get to the bottom of this?  I have exactly the same problem only on an MSA 2040 and am keen to find out.

Thanks

James