MSA Storage

MSA 2012i Drive status over SNMP

New Member

MSA 2012i Drive status over SNMP


We got a problem with the MSA 2012i. We have activated the SNMP options with the build in web interface, but the only Information we get is CPU, FPU, ambient ... temperatures and voltages for controller A and B.
But we also need the drive states.

A regular user does not have the right to enter the configuration interface oft this device. But it is important, that every user can notice an problem with the drives if one occurs.

Only the service personal got access to the physical drives or the configuration interface, so we need to monitor the drive states remote with an external application. All other devices are monitored with nagios and it would be handy if we could check the disk states also with it.

best regards