Good day... It's me again!
I have firmware for my MSA 2012i (thank you, Subhajit Khanbarman)... I need to run cp024308.exe on the manager-host and enter the address of my MSA (pic.)... Is it right?
Or I need to select in the manage console in the section "Update software" the "neptunesw-J212P01-01.bin"... Yeah?
Thanks111
Catherine.
Hello @Plazmitron1999
I hope you are doing well. !
Please refer to the following document to guide you through the firmware upgrade procedure.
link : https://support.hpe.com/hpesc/public/docDisplay?docId=sf000063636en_us&docLocale=en_US
should you have any further query please let me know.
@Plazmitron1999 I hope this helps!
If you feel this was helpful, Please HIT that KUDOS! thumb below!
Note: "While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company."
Please refer below link and check "Installation Instructions" tab to get both procedure through SMU and FTP,
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_987beb85edd0413f81c2b706b5#tab3
You can also refer release notes and got to "Installation instructions" section to get all details,
From release note search with keyword "downgrade" to get downgrade related instructions as well.
Hope this helps!
Regards
Subhajit
I am an HPE employee
If you feel this was helpful please click the KUDOS! thumb below!
***********************************************************************************
I work for HPE
Hello ! @Plazmitron1999
Good day,
just checking in to see if you have any further questions on the Firmware upgrade.
If Yes, please let us know, else you may mark this forum post as solved
@Plazmitron1999 I hope this helps!
If you feel this was helpful, Please HIT that KUDOS! thumb below!