MSA 2040 moving disks between systems

[jlangmead]

Hi

I understand that it's possible to avoid replicating large amounts of data over a WAN link between to MSA 2040s by completing a 'local replication' and then physically moving the disks between the primary and secondary arrays? If this is possible is there any technotes or videos on how to complete this procedure?

many thanks

[SUBHAJIT KHANBARMAN_1 · Accepted solution]

You need to refer "MSA Remote Snap Software" Page no: 45 onwards

http://manualzz.com/doc/22988291/msa-remote-snap-software-technical-white-paper

Attached are the imp area screenshots taken from the document for your reference

Hope this helps!
Regards
Subhajit

If you feel this was helpful please click the KUDOS! thumb below!

[jlangmead]

Perfect - exactly what I was after - thanks very much