MSA 2042 oand MSA 2040 getting event infomration every hour

[Raffiss]

 I cleared logs via CLI but it did not helped. Every hour I am getting the same message. Please  , a need to get rid off it.

Event:

Managed logs: A log region has reached the level at which it should be archived. (region: SC debug, region code: 5)

EVENT ID:#A78

EVENT CODE:400

EVENT SEVERITY:Informational

EVENT TIME:2018-01-22 07:06:35

[SahanaR]

Good day!!

This issue was resolved and was done by  disabling  managed log option and re-enable it again.

So I believe by doing that, it will stop the MSA unit keeping populate "the managed log warning code 400" every hour without having the actual log being filled in the logging system.

"clear events A or B" command, rebooting the unit nor firmware update won't help.

so current workaround :  disable managed log option and re-enable it again.

set advanced-settings [managed-logs enabled|disabled|on|off]

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04957376  pg 182

I hope this helps:)