MSA Storage

MSA 2050 / P2000 G3 SAS MSA not recognize anymore by server SAS Controller

 
Early
Occasional Contributor

MSA 2050 / P2000 G3 SAS MSA not recognize anymore by server SAS Controller

Hi there, 

I don´t understand why my DL380 G8 with SAS Fusion controller card can´t the Storage anymore ! I already try with another Server / Cable.. problem is the same. 

All the light from the MSA are green, no failure. but it seems that something not active ... Does anyone get an idea what I could do ?

Below the lights status when working... 

ThanksIMG_20220519_110143.jpg

3 REPLIES 3
support_s
System Recommended

Query: MSA 2050 / P2000 G3 SAS MSA not recognize anymore by server SAS Controller

System recommended content:

1. HPE MSA 2050 SAN Storage - Operations

2. HPE MSA 2050 User Guide

 

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

 

Thank you for being a HPE valuable community member.


Accept or Kudo

sbhat09
HPE Pro

Re: MSA 2050 / P2000 G3 SAS MSA not recognize anymore by server SAS Controller

Hello @Early,

1. Please check and confirm if the SAS fusion controller card is being detected on the server?
2. Was the MSA being detected before?
3. To isolate the source of the issue, can you please try connecting to rest of the SAS ports on the same node and to the SAS ports of the other controller?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.


I am an HPE Employee

Accept or Kudo

JonPaul
HPE Pro

Re: MSA 2050 / P2000 G3 SAS MSA not recognize anymore by server SAS Controller

@Early 
It appears that the link LED is on for the host port,  what initiators is the MSA P2000 management seeing?
Should be one (More?) discovered
What is mapped to that initiator?

What is a SAS Fusion controller card?  Is this a Smart Array HBA or another HPE SAS HBA?

I work for HPE