MSA 2060 with Windows cluster setup not working

[boculasa]

Hi

We are trying to build a active passive windows cluster server 2019 with a MSA2060 with FC and Atto cards.

The DL380 server sees the MSA 2060 just fine but after creating the cluster we don see the storage volumes anymore. Normaly we have a quorum windows cluster colume and DB volume. Whats steps or settings  are we missing compared to a MSA 2050 that works fine. Any hints will be apreciated

[support_s]

System recommended content:

1. HPE MSA 1060/2060/2062 Installation Guide

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

[boculasa]

Went trough the manual but could not find the answer so the question why it does not work for a clusterd server 2019 remains open for now

[sbhat09]

Hello @boculasa,

Can you please provide the detailed procedure you have done to create the cluster?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.