HPE Community
MSA Storage
1753846 Members
7810 Online
108807 Solutions
New Discussion

Re: MSA-500-G2 connected to 64-bit/133MHz Dual Channel Ultra320 SCSI HBA and Win2k

 
Sam Caldwell
New Member

‎07-12-2005 07:43 AM

‎07-12-2005 07:43 AM

MSA-500-G2 connected to 64-bit/133MHz Dual Channel Ultra320 SCSI HBA and Win2k

I am being asked to connect 64-bit/133MHz Dual Channel Ultra320 SCSI HBA to an MSA-500-G2.

The drivers for the adapter load and no problem appears at that point. However, MSA-500-G2 appears in device manager under the "other devices" heading. No driver appears to exist for the device and I cannot see any drives on the MSA.

Is this a legitimate (supported) configuration?
0 Kudos
Reply
1 REPLY 1
Stephen Kebbell
Honored Contributor

‎07-12-2005 07:15 PM

‎07-12-2005 07:15 PM

Re: MSA-500-G2 connected to 64-bit/133MHz Dual Channel Ultra320 SCSI HBA and Win2k

Hi,

it's not a supported config. The MSA500 G2 must be attached to a Smart Array 642. Normal SCSI Adapters are not supported.
See here:
http://h18004.www1.hp.com/products/servers/proliantstorage/sharedstorage/sacluster/questionsanswers-g2.html#10cm

Regards,
Stephen
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.