MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA P2000 G3 Unable to create remote system

 
dcy
Occasional Contributor

MSA P2000 G3 Unable to create remote system

2 MSA P2000 G3 arrays, both remote snap licensed. Both TS252R007.

 

"create remote-system username blabla password xxxxxx <nic_ip>" fails with

 

Error: The command had an invalid parameter or unrecognized parameter. - The remote system was not created because one or more of the specified parameters (IP address, user name, or password) was invalid.

 

Tried via CLI and via WBI, no difference. All management services are running (yes, http is running), the users have locale set to English (as suggested), tried with a newly created user (manage level username was created).

 

The trouble started after the password for the user was changed recently.

 

Anyone got an idea what to try next?

 

I wonder - does HP monitor these forums at all?

 

D.

1 REPLY 1
dcy
Occasional Contributor

Re: MSA P2000 G3 Unable to create remote system

Leaving this here after I've found the solution ^^

 

restart sc both, restart mc both on both arrays ...

 

Oh well. Hope it helps someone.

 

D.