MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA SAN Switch 2/8 password reset

 
mdaoud
Advisor

MSA SAN Switch 2/8 password reset

Hi all,
kindly advice me how can i reset web management password for above object part number:288247-B21.
4 REPLIES 4
Mikko Niskanen_1
Frequent Advisor

Re: MSA SAN Switch 2/8 password reset

Ruben Renders
Frequent Advisor

Re: MSA SAN Switch 2/8 password reset

I suggest your working with the admin account?

You should be able to ssh or telnet to the switch and login with:
admin - password
user - password
factory - password
root - fibranne

If you can log in with the root account, you should be able to perform an passwd command.
Watch out with the root account, you have full access to the switch!

Otherwise, you need to call customer service i think.
Orca77
Occasional Collector

Re: MSA SAN Switch 2/8 password reset

I`m apologise, but thread is not working.

We have  SAN HP StorageWorks Modular Smart Array 1000 (Part Number 201723-B22)

with two Modular smart array 1000 controlers (Part Number 218231-B22)

and two HP StorageWorks MSA SAN switch 2/8 (Part Number 288247-B21, Fabric OS v3.2.0).

Through one of switches it isn't possible to be connected to the server. The POST indication and messages received through serial cable of errors isn't present, and all tests are passed.

Logon to a switch is impossible as all passwords by default were changed (admin, root, factory, use/password, fibranne).

According to the instruction "BROCADE. Fabric OS. Password Recovery Notes" for reset of the password on switches with Fabric OS v3.x is used the Password Recovery firmware method. We made it, but it didn't work. The firmware booted, but passwords weren't reset.

Please, tell as how to reset the passwords or to receive firmware for recovery of passwords by default?

 

Torsten.
Acclaimed Contributor

Re: MSA SAN Switch 2/8 password reset

Here is the procedure:

 

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01781247&sp4ts.oid=315123

 

Note:

 

Recovery firmware must be obtained from HP Support

 

You may consider to get a used switch from somewhere with known credentials ...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!