MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA Selective Storage Presentation List Clearing?

 
Eric Willegen
Occasional Contributor

MSA Selective Storage Presentation List Clearing?

Hi,

How can you delete 'old' entries in de Selective Storage Presentation in the MSA1000 Controller. When i remove old SAN-hosts they are still in this list. How do you clear that?

Regards
Eric
The Netherlands

3 REPLIES 3
James Muell
Valued Contributor

Re: MSA Selective Storage Presentation List Clearing?

The only way I have found is to reboot the MSA itself. I believe this has been fixed in one of the latest MSA firmware versions. Check the Firmware Readme notes for the versions your running or interested in.
Astro2
Frequent Advisor

Re: MSA Selective Storage Presentation List Clearing?

Hi
I think that it's possible from the CLI accessible on the front of the controller (via serial).
The command is maybe "delete connection ..."

regards
Armando
James Muell
Valued Contributor

Re: MSA Selective Storage Presentation List Clearing?

Good point, Yes, using the cli cmds can remove connections but you will also have to delete the other components like host and luns (if not being used by other hosts) as well. This can also be accomplished in the SSP interface by unchecking the luns from the host WWNs, deleting the host names and setting it to Default and SAVING that.