MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1000+2 FCA2214 + 1 ML370 + Secure Path 4.0C_SP1+W2K03

 
SOLVED
Go to solution
Srdjan_2
Advisor

MSA1000+2 FCA2214 + 1 ML370 + Secure Path 4.0C_SP1+W2K03

Hy,
I have single ML370 with two Qlogic FCA Adapters connected to single MSA1000 controler over single StorageWorks msa hub 2/3. Everything went fine, ACU, HBA drivers, SSP, Instaling Secure pAth,.... and then i realise that i can not see storage through another/second HBA. If i install SecurePath with HBA1 then when i plug in fiber cable into HBA2 SecurePath does not reognize it an vice versa. Both HBAs have same firmware, driver, revisions, they work fine, cables work fine, Securepath can work with both but never with both in the same time. There are no log errors in event viewer, hp log viewer, hp agent, msa log.....
I have all manuals, i did everything fine. Is it possible that i can not use two fiber connections in single server connected to MSA1000 with single controler? I am out of any ideas, i really tried everything in last 2 days....

Srdjan
2 REPLIES 2
Uwe Zessin
Honored Contributor
Solution

Re: MSA1000+2 FCA2214 + 1 ML370 + Secure Path 4.0C_SP1+W2K03

Srdjan,
you cannot do that with a single MSA controller (you're not the first one who tried it). You do need a second controller for this.
.
Srdjan_2
Advisor

Re: MSA1000+2 FCA2214 + 1 ML370 + Secure Path 4.0C_SP1+W2K03

I tought so....
Tanx Uwe