MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1000 CLI config guide on RP4440

 
SOLVED
Go to solution
EU-Admins-UNIX
Regular Advisor

MSA1000 CLI config guide on RP4440

Hi All

 

Is there a document out there that details how to confiigure an MSA1000 from the CLI?  I have connectivity via the RJ45Z cable, and the MSA is newly attached to an RP4440.  The MSA is visible from the OS, obviously my ultimate aim is to configure the disks and present them as PVs to HP-UX 11.31.

 

0/0/10                 ba                                Local PCI-X Bus Adapter (783)
0/0/10/1                  slot                           PCI Slot
0/0/10/1/0                   fc                          HP Tachyon XL2 Fibre Channel Mass Storage Adapter
0/0/10/1/0.8                    fcp                      FCP Protocol Adapter
0/0/10/1/0.8.0.124.0                                ext_bus         FCP Array Interface
0/0/10/1/0.8.0.124.0.0                                 target
0/0/10/1/0.8.0.124.0.0.0                                  ctl       COMPAQ  MSA1000
0/0/10/1/0.8.0.255.7                                ext_bus         FCP Device Interface
0/0/10/1/0.8.0.255.7.12                                target
0/0/10/1/0.8.0.255.7.12.0                                 ctl       COMPAQ  MSA1000

 

Regards

 

Tariq

 

 

P.S. This thread has been moevd from General to Storage Area Networks (SAN) (Small and Medium Business). - Hp Forum Moderator

3 REPLIES 3
hvhari
Esteemed Contributor

Re: MSA1000 CLI config guide on RP4440

Hi,

 

CLI Guide is available at : http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02520779/c02520779.pdf

 

You could also try using the web interface (Storage Management Utlity) for configuring the storage system.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02520791/c02520791.pdf

 

Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
hvhari
Esteemed Contributor
Solution

Re: MSA1000 CLI config guide on RP4440

Hi,

 

I gave P2000 MSA G3 guides in my previous post.

 

Guides for MSA 1000 is below.

 

CLI User guide : http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01183955/c01183955.pdf

Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
EU-Admins-UNIX
Regular Advisor

Re: MSA1000 CLI config guide on RP4440

Thanks.  Printer, acetated and bound!

 

Lovely!