MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1000 and SSP

 
Katrin Rückbrod
Occasional Contributor

MSA1000 and SSP

I have bound in the SSP a test server. Now the server isn't connect to the MSA1000. In the picture for SSP the old server is also shown? How can I delete this entrys?
3 REPLIES 3
James Muell
Valued Contributor

Re: MSA1000 and SSP

If your using the GUI. You can open the Array Controller utility and open SSP and just uncheck the LUN(s) for that host. Then if you don't plan to use that lun for anything delete it. Then Delete the profile name and reset the OS type blank or default.
My experience with the CLI tool is the WWNs, host names etc., do not go away or refresh until the MSA is rebooted.
Steven Clementi
Honored Contributor

Re: MSA1000 and SSP

Yep, a reboot usually clears the stray connections that are not connected anymore.


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Katrin Rückbrod
Occasional Contributor

Re: MSA1000 and SSP

I restart the MSA several times and the entries don't go away. Now the MSA is in Production environment and a restart is not possible. I configured like James Muell but I can't restart the MSA.

Thanks
Katrin Rueckbrod