HPE Community
MSA Storage
1752843 Members
4004 Online
108789 Solutions
New Discussion

MSA1000 and Storageworks 4300

 
CA992941
New Member

‎10-01-2003 10:30 AM

‎10-01-2003 10:30 AM

MSA1000 and Storageworks 4300

Has anyone had sucess in attaching these two together with the MSA1000 as the controller? The MSA1000 has the 2/8 San switch installed with the 256MB memory upgrade. I plan to remove the 4300 chassis from the encloseure and set both the 4300 and MSA1000 in the rack together. I assume I use the SCSI ports to connect them together?

Is it worth it or am I running down the primrose path?

Thanks in advance!!

Jrod
0 Kudos
Reply
1 REPLY 1
david5337_1
Regular Advisor

‎10-12-2003 09:29 PM

‎10-12-2003 09:29 PM

Re: MSA1000 and Storageworks 4300

MSA1000 can link two R4314 or one R4354.
It has only two scsi ports.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.