MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1000 vs HPUX 11.23

 
SOLVED
Go to solution
Slawek Ksiazek
Regular Advisor

MSA1000 vs HPUX 11.23

Hi All

I have problem with HPUX on rx7640 after instalation HPUX 11.23 I see in syslog.log this

1/0/6/1/1: private loop device didn't acquire its hard address:
Hard Address is 0x0, but acquired AL_PA is 0x1.
System won't be able to see LUNs behind this device port.
It appears that there are (or were) more than one device with the
same address setting.
NOTE: Even after you change the address settings on the devices,
it may be necessary to reset or power-cycle both the
devices whose settings have been changed, and any remaining
device with the address setting which encountered the
conflict.
EXAMPLE: You see this diagnostic message and find three devices with
address setting 0x05. You change one device to address 0x06
and another to 0x07. You now may need to reset or
power-cycle ALL THREE devices.


and

# fcmsutil /dev/fcd1

Vendor ID is = 0x001077
Device ID is = 0x002422
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012d7
PCI Mode = PCI-X 266 MHz
ISP Code version = 4.0.91
ISP Chip version = 3
Topology = PRIVATE_LOOP
Link Speed = 2Gb
Local N_Port_id is = 0x000002
Previous N_Port_id is = None
Local Loop_id is = 124
N_Port Node World Wide Name = 0x50060b00006855a7
N_Port Port World Wide Name = 0x50060b00006855a6
Switch Port World Wide Name = N/A
Switch Node World Wide Name = N/A
Driver state = ONLINE
Hardware Path is = 1/0/6/1/1
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08.02 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Sep 24 2007,00:39:23

fcmsutil /dev/fcd1 get remote all
No device found.

and

# ioscan -fn
Class I H/W Path Driver S/W State H/W Type Description
=============================================================================
root 0 root CLAIMED BUS_NEXUS
cell 0 1 cell CLAIMED BUS_NEXUS
ioa 0 1/0 sba CLAIMED BUS_NEXUS System Bus Adapter (12eb)
ba 0 1/0/0 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
ext_bus 0 1/0/0/3/0 mpt CLAIMED INTERFACE SCSI Ultra320
/dev/mpt0
target 1 1/0/0/3/0.6 tgt CLAIMED DEVICE
disk 1 1/0/0/3/0.6.0 sdisk CLAIMED DEVICE HP 300 GST3300655LC
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0
/dev/dsk/c0t6d0s1 /dev/rdsk/c0t6d0s1
/dev/dsk/c0t6d0s2 /dev/rdsk/c0t6d0s2
/dev/dsk/c0t6d0s3 /dev/rdsk/c0t6d0s3
target 2 1/0/0/3/0.7 tgt CLAIMED DEVICE
ctl 0 1/0/0/3/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
ext_bus 1 1/0/0/3/1 mpt CLAIMED INTERFACE SCSI Ultra320
/dev/mpt1
target 0 1/0/0/3/1.2 tgt CLAIMED DEVICE
disk 0 1/0/0/3/1.2.0 sdisk CLAIMED DEVICE Optiarc DVD RW AD-5170A
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
target 3 1/0/0/3/1.7 tgt CLAIMED DEVICE
ctl 1 1/0/0/3/1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c1t7d0
ba 1 1/0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
ba 2 1/0/1/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
ext_bus 2 1/0/1/1/0/4/0 mpt CLAIMED INTERFACE HP AB290-60001 PCI/PCI-X U320 SCSI 2-port U320 SCSI/2-port 1000B-T Combo Adapter
/dev/mpt2
target 4 1/0/1/1/0/4/0.7 tgt CLAIMED DEVICE
ctl 2 1/0/1/1/0/4/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c2t7d0
ext_bus 3 1/0/1/1/0/4/1 mpt CLAIMED INTERFACE HP AB290-60001 PCI/PCI-X U320 SCSI 2-port U320 SCSI/2-port 1000B-T Combo Adapter
/dev/mpt3
target 5 1/0/1/1/0/4/1.6 tgt CLAIMED DEVICE
disk 2 1/0/1/1/0/4/1.6.0 sdisk CLAIMED DEVICE HP 300 GHUS153030VL3800
/dev/dsk/c3t6d0 /dev/rdsk/c3t6d0
target 6 1/0/1/1/0/4/1.7 tgt CLAIMED DEVICE
ctl 3 1/0/1/1/0/4/1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c3t7d0
lan 0 1/0/1/1/0/6/0 iether CLAIMED INTERFACE HP AB290-60001 PCI/PCI-X 1000Base-T 2-port U320 SCSI/2-port 1000B-T Combo Adapter
lan 1 1/0/1/1/0/6/1 iether CLAIMED INTERFACE HP AB290-60001 PCI/PCI-X 1000Base-T 2-port U320 SCSI/2-port 1000B-T Combo Adapter
ba 3 1/0/2 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
lan 2 1/0/2/1/0 iether CLAIMED INTERFACE HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter
lan 3 1/0/2/1/1 iether CLAIMED INTERFACE HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter
ba 4 1/0/4 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
lan 4 1/0/4/1/0 iether CLAIMED INTERFACE HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter
lan 5 1/0/4/1/1 iether CLAIMED INTERFACE HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter
ba 5 1/0/6 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
fc 0 1/0/6/1/0 fcd CLAIMED INTERFACE HP AB379-60101 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd0
fc 1 1/0/6/1/1 fcd CLAIMED INTERFACE HP AB379-60101 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 2)
/dev/fcd1
ba 6 1/0/8 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
ba 7 1/0/8/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
fc 2 1/0/8/1/0/4/0 fcd CLAIMED INTERFACE HP A9782-60002 PCI/PCI-X Fibre Channel FC/GigE Combo Adapter (FC Port 1)
/dev/fcd2
lan 6 1/0/8/1/0/6/0 igelan CLAIMED INTERFACE HP A9782-60002 PCI/PCI-X 1000Base-SX FC/GigE Combo Adapter
ba 8 1/0/10 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
lan 7 1/0/10/1/0 iether CLAIMED INTERFACE HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter
lan 8 1/0/10/1/1 iether CLAIMED INTERFACE HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter
ba 9 1/0/12 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
fc 3 1/0/12/1/0 fcd CLAIMED INTERFACE HP AB379-60101 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd3
fc 4 1/0/12/1/1 fcd CLAIMED INTERFACE HP AB379-60101 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 2)
/dev/fcd4
ba 10 1/0/14 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
fc 5 1/0/14/1/0 fcd CLAIMED INTERFACE HP AB379-60101 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd5
fc 6 1/0/14/1/1 fcd CLAIMED INTERFACE HP AB379-60101 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 2)
/dev/fcd6
processor 0 1/120 processor CLAIMED PROCESSOR Processor
processor 1 1/121 processor CLAIMED PROCESSOR Processor
processor 2 1/122 processor CLAIMED PROCESSOR Processor
processor 3 1/123 processor CLAIMED PROCESSOR Processor
processor 4 1/124 processor CLAIMED PROCESSOR Processor
processor 5 1/125 processor CLAIMED PROCESSOR Processor
processor 6 1/126 processor CLAIMED PROCESSOR Processor
processor 7 1/127 processor CLAIMED PROCESSOR Processor
ba 11 1/250 pdh CLAIMED BUS_NEXUS Core I/O Adapter
acpi_node 0 1/250/0 acpi_node CLAIMED INTERFACE Acpi Hardware
ipmi 0 1/250/1 ipmi CLAIMED INTERFACE IPMI Controller
/dev/ipmi
tty 0 1/250/2 asio0 CLAIMED INTERFACE Built-in RS232C
/dev/diag/mux0 /dev/mux0 /dev/tty0p0


(I have rx7640 with two npar and I have direct connection MSA1000 and server

How can I solve this problem?

Slawek

 

 

P.S. This thread has been moved from General to Storage Area Networks (SAN) (Small and Medium Business) - Hp Forum Moderator

7 REPLIES 7
Uwe Zessin
Honored Contributor
Solution

Re: MSA1000 vs HPUX 11.23

Slawek,

did you configure the MSA controller(s) for hard addressing and
gave them a high number for the loop ID?
.
Slawek Ksiazek
Regular Advisor

Re: MSA1000 vs HPUX 11.23

How can I do it?Maybe you have some information or document?Thanks a lot for help.

Slawek
Slawek Ksiazek
Regular Advisor

Re: MSA1000 vs HPUX 11.23

In addition i have MSA without SAN switch
Uwe Zessin
Honored Contributor

Re: MSA1000 vs HPUX 11.23

CLI>set this_controller_hard_address enable 10
.
Slawek Ksiazek
Regular Advisor

Re: MSA1000 vs HPUX 11.23

Hi

Witch address i must enable? How can i check it?


Forum HP is the best!!!


Slawek
Uwe Zessin
Honored Contributor

Re: MSA1000 vs HPUX 11.23

It can be a loop ID between 0 and 125. I would use a low value to keep the high-priority ones for the server.
.
Greg Vaidman
Respected Contributor

Re: MSA1000 vs HPUX 11.23