MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1000 with Hub 2/3

 
Emad Omar
Regular Advisor

MSA1000 with Hub 2/3

I have MSA1000 Storage System with one Controller and Hub2/3 . The MSA Firmware is V4.48 . This MSA connected to two HP-UX Servers with single path and when I issued a CLI Command : show connections, I got the two paths with different WWPNs. Up to now everything is OK. But I read that Controller 1 port 1 for each connection is Offline status while two servers running up.I spite of all logical drives configured at MSA1000 are visible at all HP-UX Servers.

Please advise. . .