- Community Home
- >
- Storage
- >
- Entry Storage Systems
- >
- MSA Storage
- >
- Re: MSA1500cs reporting "Error occurred reading RI...
MSA Storage
1752822
Members
4018
Online
108789
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО05-21-2007 11:30 PM
тАО05-21-2007 11:30 PM
MSA1500cs reporting "Error occurred reading RIS copy from ... (all drives)"
Hi,
We have a pretty new MSA1500cs. It's got two fibre I/O modules and it's running Firmware Version 7 (active/active).
There's one MSA 30 attached, fully loaded with 14x 300 GByte disks.
I've defined two Logical Drives, with one physical disk acting as the hot-spare for both drives.
HP's System Management Homepage reports that one drive has failed (I /believe/ it's the hot spare, but it's proving difficult to identify). There are no fault lights on the exterior of the MSA or on any of the disks.
If I use "hpacucli" to display some information, here's what I get (apologies for the length of this output):
===
=> ctrl all show
MSA1500 CS at atgcls-msa (sn: PB9840TX3TY01G, csn: SGA06520EY, wwn:
500508B30093F9A1)
Smart Array P400 in Slot 1 (sn: PA2240J9SU71KW)
=> ctrl sn=PB9840TX3TY01G pd all show
MSA1500 CS at atgcls-msa
array A (Failed)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, Failed, spare)
array B (Failed)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, Failed, spare)
=> ctrl sn=PB9840TX3TY01G pd all show detail
MSA1500 CS at atgcls-msa
array A (Failed)
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: Failed
Drive Type: Spare Drive
Interface Type: Parallel SCSI
Transfer Mode: Async Wide
Size: 300 GB
Transfer Speed: 10 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AUJN0706
Model: COMPAQ BD30089BBA
array B (Failed)
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: Failed
Drive Type: Spare Drive
Interface Type: Parallel SCSI
Transfer Mode: Async Wide
Size: 300 GB
Transfer Speed: 10 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AUJN0706
Model: COMPAQ BD30089BBA
===
Notice how all the Bay IDs etc, and most of the disk serial numbers, are identical? This seems a little odd to me.
I've also attached an ADU report (I've omitted information about the internal Smart Array controller). Notice how all disks are reporting "Error occurred reading RIS copy...."?
This can't be good, can it? I've logged a call with HP's hardware support, but they've yet to come back with anything sounding like a diagnosis.
Has anyone got any ideas? I've asked for the serial cable to be plugged in, so I might be able to run some commands via that. BTW, this is attached directly to a RHEL box, so I can't use any Windows utilities.
FWIW, the Logical Drives I've created /appear/ to be working fine.
We have a pretty new MSA1500cs. It's got two fibre I/O modules and it's running Firmware Version 7 (active/active).
There's one MSA 30 attached, fully loaded with 14x 300 GByte disks.
I've defined two Logical Drives, with one physical disk acting as the hot-spare for both drives.
HP's System Management Homepage reports that one drive has failed (I /believe/ it's the hot spare, but it's proving difficult to identify). There are no fault lights on the exterior of the MSA or on any of the disks.
If I use "hpacucli" to display some information, here's what I get (apologies for the length of this output):
===
=> ctrl all show
MSA1500 CS at atgcls-msa (sn: PB9840TX3TY01G, csn: SGA06520EY, wwn:
500508B30093F9A1)
Smart Array P400 in Slot 1 (sn: PA2240J9SU71KW)
=> ctrl sn=PB9840TX3TY01G pd all show
MSA1500 CS at atgcls-msa
array A (Failed)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, Failed, spare)
array B (Failed)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, OK)
physicaldrive 0:0 (box 0:bay 0, Parallel SCSI, 300 GB, Failed, spare)
=> ctrl sn=PB9840TX3TY01G pd all show detail
MSA1500 CS at atgcls-msa
array A (Failed)
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AVKA0707
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: Failed
Drive Type: Spare Drive
Interface Type: Parallel SCSI
Transfer Mode: Async Wide
Size: 300 GB
Transfer Speed: 10 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AUJN0706
Model: COMPAQ BD30089BBA
array B (Failed)
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 3 Wide
Size: 300 GB
Transfer Speed: 160 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720ATE30706
Model: COMPAQ BD30089BBA
physicaldrive 0:0
Box: 0
Bay: 0
Status: Failed
Drive Type: Spare Drive
Interface Type: Parallel SCSI
Transfer Mode: Async Wide
Size: 300 GB
Transfer Speed: 10 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB1
Serial Number: DA01P720AUJN0706
Model: COMPAQ BD30089BBA
===
Notice how all the Bay IDs etc, and most of the disk serial numbers, are identical? This seems a little odd to me.
I've also attached an ADU report (I've omitted information about the internal Smart Array controller). Notice how all disks are reporting "Error occurred reading RIS copy...."?
This can't be good, can it? I've logged a call with HP's hardware support, but they've yet to come back with anything sounding like a diagnosis.
Has anyone got any ideas? I've asked for the serial cable to be plugged in, so I might be able to run some commands via that. BTW, this is attached directly to a RHEL box, so I can't use any Windows utilities.
FWIW, the Logical Drives I've created /appear/ to be working fine.
2 REPLIES 2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО05-21-2007 11:48 PM
тАО05-21-2007 11:48 PM
Re: MSA1500cs reporting "Error occurred reading RIS copy from ... (all drives)"
Jack, Can you attach the MSA cli cable and provide a >show tech_support
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО05-29-2007 08:44 PM
тАО05-29-2007 08:44 PM
Re: MSA1500cs reporting "Error occurred reading RIS copy from ... (all drives)"
Hi, Apologies for the delay -- this is the first time I've managed to get someone to attach the serial cable and run the show tech_support.
Results attached.
Results attached.
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP