MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA2000 G3 Firmware

 
Julian Stenning
Frequent Advisor

MSA2000 G3 Firmware

Hi -

 

I have a couple MSA2000 G3 FC/iSCSI units and am having firmware upgrade issues on both. Each unit has 2 controllers and I'm trying to update with TS240P001.

 

On one device controller A CPLD has updated from v13 to v22, but the controller B CPLD won't update (even with partner update enabled). On the other device niether CPLD's will update and are stuck on v13.

 

I'm updating with FTP and the error is that the MC partitions cannot be dismounted.

 

Any ideas?

4 REPLIES 4
hvhari
Esteemed Contributor

Re: MSA2000 G3 Firmware

did u try restarting the second controller ? ("restart mc" command from the msa console)

Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
Julian Stenning
Frequent Advisor

Re: MSA2000 G3 Firmware

 

Yes, tried that and unfortunately no change.

 

HP have swapped one controller, so I have at least one device working now. The other still has both A & B CPLD's not at bundle version.

gsb_2
Regular Advisor

Re: MSA2000 G3 Firmware

The following issues were fixed in this TS240P003 firmware release

 

During a firmware update, the CPLD portion of the firmware failed to load.

 

 

May be the problem.

Julian Stenning
Frequent Advisor

Re: MSA2000 G3 Firmware

Thanks, after 3-or-so attempts that seems to have fixed the issue.