MSA2000 - Management

[Ian WilsonHP]

I am used to managing older msa1000 storage through the server based HP Array Config Web Interface.

just set up a msa2000 but the Server cannot see the msa2000 raid controller through the utility mentioned above. Tried this through a fibre fabric switch and direct fibre to the san. Have I done something wrong or is this managed through the msa built in web interface which I have managed to access?

Thanks in advance

[Martin Smoral]

Use the web interface. If using DHCP use the Serial interface then type
Show Network -Parameters
to find out the Leased IP addresses for the MSA controllers, otherwise:
Default IP's (SM=Class C, GW=10.0.0.1)
http://10.0.0.2 !Controller A
http://10.0.0.3 !Controller B
Default UserAccount=manage
Default password= !manage
you can also use the serial port to set your own IP.
then just browse to the IP, login and manage your MSA2000
regards,
Martin

[Ian WilsonHP]

Thanks Martin.

Does that mean HP have changed the way the MSA is managed? Just want to make sure that I have done nothing wrong. Merry xmas.

[Martin Smoral]

yes, the MSA2000 is a different animal. It is not managed with the ACU like the MSA1000/1500....Please assign points if this helps....
Martin

[Ian WilsonHP]

much appreciated.