MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

 
Occasional Advisor

MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

Hi,

 

I have a two-node Server 2012 R2 Hyper-V Cluster running on HP DL380p Gen8 and MSA 2040 (FibreChannel)+D2700 Enclosure.

 

I have several Disks configured (2x Raid6, 4 Raid1) and I added the Raid6-Volumes (on MSA2040) to/as CSV - but when I try to add one of the Raid1Volumes (on D2700) as CSV I get an error:

 

Error Code: 0x08007139f

The Group or resource is not in the correct state to perform the requested Operation.

 

EventLog (Source FailoverClustering; ID:5144):

While adding the disk ('Volume3') to Cluster Shared Volumes, setting explicit snapshot diff area association for volume ('\\?\Volume{811afdcd-2ebd-4475-8e78-a86d9ab991fe}\') failed with error 'HrError(0x8007139f)'. The only supported software snapshot diff area association for Cluster Shared Volumes is to self.

 

Is there a support-Issue for Server 2012 R2 and D2700 enclosure?

 

Regards

Christian

15 REPLIES 15
Acclaimed Contributor

Re: MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

The D2700 is connected to the MSA2040, right?

So the difference must be in the vdisk/volumes settings (I assume you created a visk only for some disks in the D2700) - so compare the vdisk and volumes settings.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor

Re: MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

Thanks for your reply.

 

Yes - the MSA2040 is connected via FC to the FC-switches - Server 2012 R2 MPIO is configured correctly

The D2700 is connected to the MSA2040 via SAS.

all v-disks are configured with the same settings. (see Attachments)

 

 

Acclaimed Contributor

Re: MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

If you do

# show volumes

from the MSA Cli, do you see "snap pool" or something different from "standard" in CLASS?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor

Re: MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

Hi,

 

no - there is Class = standard for every vdisk:

 

################################################################################

 

# show volumes
Vdisk          Name            Size     Serial Number
  WR Policy     Cache Opt        Read Ahead Size  Type         Class
  Qualifier                      Volume Description
  WWN                               Health     Health Reason
  Health Recommendation
--------------------------------------------------------------------------
vD5_R1_900_01  Volume0_Quroum  1023.4MB 00c0ff1a1e4d00002d9d905201000000
  write-back    standard         Adaptive         standard     standard
  N/A
  600C0FF0001A1E4D2D9D905201000000  OK

vD1_R6_300_01  Volume1         2696.5GB 00c0ff1a1e4d000070838e5201000000
  write-back    standard         Adaptive         standard     standard
  N/A
  600C0FF0001A1E4D70838E5201000000  OK

vD2_R6_300_02  Volume2         2696.5GB 00c0ff1a12830000c7838e5201000000
  write-back    standard         Adaptive         standard     standard
  N/A
  600C0FF0001A1283C7838E5201000000  OK

vD3_R1_146_01  Volume3         146.0GB  00c0ff1a1e4d00001e848e5201000000
  write-back    standard         Adap  N/A                                      
  600C0FF0001A1E4D1E848E5201000000  OK

vD4_R1_146_02  Volume4         146.0GB  00c0ff1a128300007f848e5201000000
  write-back    standard         Adaptive         standard     standard
  N/A
  600C0FF0001A12837F848E5201000000  OK

vD5_R1_900_01  Volume5         897.6GB  00c0ff1a1e4d0000709d905201000000
  write-back    standard         Adaptive         standard     standard
  N/A
  600C0FF0001A1E4D709D905201000000  OK

vD6_R1_900_02  Volume6         898.6GB  00c0ff1a128300001a858e5201000000
  write-back    standard         Adaptive         standard     standard
  N/A
  600C0FF0001A12831A858E5201000000  OK

vD7_R1_900_03  Volume7         898.6GB  00c0ff1a1e4d000057858e5201000000
  write-back    standard         Adaptive         standard     standard
  N/A
  600C0FF0001A1E4D57858E5201000000  OK
                                     --------------------------------------------------------------------------
Success: Command completed successfully. (2013-11-26 12:06:00)
################################################################################

Acclaimed Contributor

Re: MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

But it looks different for volume3:

 

vD2_R6_300_02  Volume2         2696.5GB 00c0ff1a12830000c7838e5201000000
  write-back    standard         Adaptive         standard     standard
  N/A
  600C0FF0001A1283C7838E5201000000  OK

vD3_R1_146_01  Volume3         146.0GB  00c0ff1a1e4d00001e848e5201000000
  write-back    standard         Adap  N/A                                      
  600C0FF0001A1E4D1E848E5201000000  OK

 

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor

Re: MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

ups :)
you are right - sorry - and how can I change/fix that?
Acclaimed Contributor

Re: MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

Looks like the "Type" is "N/A" - this is the problem.

Could you again do

show volumes Volume3

to ensure there is no problem with cut and paste?

I don't think there is a way to change this from "N/A" to standard other then re-creating the volume.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor

Re: MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

# show volumes Volume3
Vdisk          Name     Size    Serial Number                     WR Policy
  Cache Opt        Read Ahead Size  Type         Class
  Qualifier                      Volume Description
  WWN                               Health     Health Reason
  Health Recommendation
-------------------------------------------------------------------------------
vD3_R1_146_01  Volume3  146.0GB 00c0ff1a1e4d00001e848e5201000000  write-back
  standard         Adaptive         standard     standard
  N/A
  600C0FF0001A1E4D1E848E5201000000  OK

-------------------------------------------------------------------------------
Success: Command completed successfully. (2013-11-26 12:36:23)

I saw, there is no ChunkSize defined for the vDisks which are having problems.

Is it best practise to set the chunkSize for vdisks to 512k for Hyper-V Cluster?

 

Acclaimed Contributor

Re: MSA2040 + D2700 Enclosure - Server 2012R2 Hyper-V Cluster

I'm not sure now to which column the "N/A" belongs...

However, if the chunk size is not modified during vdisk creation, it is default at 512.

Do

show vdisks vD3_R1_146_01

I would just delete the volume and the vdisk and start over, creating this vdisk again, then create the volume again.
There is something wrong with it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!