cancel
Showing results for 
Search instead for 
Did you mean: 

MSA2040

 
Jason Boon
Occasional Advisor

MSA2040

Hi,

I have a MSA240, I have read these support active - active mode. Is this the default mode and how can I check it is in this mode. I have a management port on each controller but I can only connect to the manage port on the bottom controller. I can ping the IP for the other management port on the other controller.

Both controllers have a staus of 'Operational' and both management ports have a status of 'manual'

Many Thanks

JB

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: MSA2040

This array works in active/active ALUA mode, this means each controller is the owner of one or more vdisks. Each controller module has a management controller (MC) and a storage controller.

I would try to restart the MC of controller A like this:

> restart mc a


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!