cancel
Showing results for 
Search instead for 
Did you mean: 

MSA2040

 
Kitti Thanapuasuwan
Occasional Advisor

MSA2040

I just have one unit of MSA2040.  Ithas two controllers.  It will connect to two Windows 2016 servers similar to the topic in HP MSA 2040 SAN Storage - Connecting Hosts Figure 5.(http://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=5386548&docLocale=en_US&docId=emr_na-c03820022)

Can anyone give me some advise what IP addresses I should assign to MSA network ports?

Controller A - port 1-4: IP address ?

Controller B - port 1-4: IP address ?

Also on Server 1 and Server 2 which each server has 2 ports.

Thank you

1 REPLY 1
rgijsen
Frequent Advisor

Re: MSA2040

You'll have to assign an IP address you machines can connect to, ideally in the same subnet. But this is so basic, if you don't have a clue then you probably shouldn't be installing anything production on it at all.