MSA Storage
1748336 Members
3709 Online
108762 Solutions
New Discussion

Re: MSA2060 SAS connected to dual host hyper-v cluster

 
gordonrobinson
Occasional Visitor

MSA2060 SAS connected to dual host hyper-v cluster

a bit of a 2 fold question

I have 2 hp 380g10 connected to a MSA 2062.   1 SAS port from each cobtroller goes to each server. i.e.  1  cable from controller A and 1 port from Controller B goes to each server (4 cables in total)

disks split between SSD (volume) and HDD (Volume)

I'm not sure how I should configure the  Hosts or Host groups, I've just winged it and can see the disks on each server, but unsure if it's correct as   speed  on the server to the SAN's is slow than my 7 year old DL380's with MSA2040

any pointers much appritiated or pointer to a discussion if already exisits.

 

1 REPLY 1
S_Sarkar
HPE Pro

Re: MSA2060 SAS connected to dual host hyper-v cluster

Hello,

I would like to share the input on the MSA 2060 and Host connectivity. You may look at the page number 34 or 35 on host connectivity:

https://support.hpe.com/hpesc/public/docDisplay?docId=a00105314en_us&docLocale=en_US

 

 

Regards,

Subrata Sarkar

 


I am an HPE employee
Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise

Accept or Kudo