MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA500 G2 Node 1 gets disconnected if node 2 boots into the OS

 
Manny Gonzalez
Occasional Visitor

MSA500 G2 Node 1 gets disconnected if node 2 boots into the OS

We have 2 DL380 G4's with an MSA500 G2 setup with the high availability pack. All was fully operational for over 6 months, suddenly Node 2 started shuting down intermitantly. Now we are unable to get it to see the MSA500. f node 2 is connect to bus A of the MSA500 instead of Node 1 the unit detects everything ok. But nothing comunicates with bus B. If Node 2 attemps to boot will Node 1 is fully functional, node 1 gets disconected before node 2 gets to control+alt+Del. All Major componets have been replaced including the 4 port interface board on the MSA500, with the same result. Any insight would be appreciated. Thank you