MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA500 G2 with DL380G5 OS windows 2008

 
ml570g4
Occasional Contributor

MSA500 G2 with DL380G5 OS windows 2008

Hi All,

i installed DL380G5 with latest firmware update and drivers update, also i installed windows 2008 server with latest windows update. this server is connected to MSA500G2 through scsi connection. MSA connected to server through SCSI Array controller 624. through Array configuration utility on server we can access the the storage and create array with logical drive, from server side also you can use this partition without any problem, but when i enabled SSP, server can not see the partition, if ssp disabled server can see the partition. i checked the adapter ID on card and inside the ACU and it is correct. where is the problem? this is not the first time to configure SSP with OS: win2008.
note: all firmwares on server and drivers are up to date. i should configure SSP because i have another three servers should be connected to same MSA.