Monitoring EVA5000

[Mohammad Yusuf]

We have an EVA5000. I need to monitor the SAN performance as well, and if possible, the fabric performance too. I normally use teh brocade switch interface to monitor the fabric performance and use EvaPerf for SAN performance figures. However EvaPerf does not give me any latencies nor can I get detailed monitoring at various levels or any reports. What can I use to monitor my SAN? I believe Storage Essentials is a solution, but probably an expensive solution at that? Any help?

Regards

[Chris Rosan]

I have an EVA8000 and there are plugin's for Microsoft Performance monitor (perfmon). Have you tried that?

A friend told me recently to try this one:

http://manageengine.adventnet.com/products/opstor/index.html

It's mean to work on many/most SAN's. I haven't had a chance to try it so your feedback would be good.

It also does SAN switches.

Their software is also VERY reasonably priced.

[Mohammad Yusuf]

Thank you Chris,

I did try out the Windows PerfMon extensions to monitor SAN parameters but I did find differences in the figures reported by this and by EvaPerf. It might have been doe to some mistake from my side but I need to be sure from HP that both reporty the same figures.

Thank you for the reference to the third party software.

Best regards,
Yusuf