MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MsgGCAP event when adding a new switch to our existing fabric

 
Mike Clancey
Occasional Visitor

MsgGCAP event when adding a new switch to our existing fabric

Just a quick question if this message is normal when connecting a new FC switch to an existing fabric. The fabric OS manual says write it down & call tech support. I figured I throw it out here first.

MS detected Unstable Fabric (MsgGCAP: DOMAIN_INVALID for d=20)

The newer switch is a Hp SanSwitch 4/8 (w/power pack) and when I connected it to our existing fabric (2 - HP 2/16 SanSwitches) I received the MsgGCAP event.

Everything looks ok, the zones pulled across in to the new switch, I haven't connected any hosts thru it yet.

Just wondering,

Thanks in advance, Mike C.